• durable for tough environments
• built-in relay contacts
AAA1000 low bleed die attach adhesive is a Teflon (PTFE) filled non-conductive paste specifically designed for tight-tolerance die stacking. It is also usable for other applications where a soft non-abrasive electrical insulator is required. The low bleed property is achieved without sacrificing the superior properties of a BMI resin that has a proven track record of passing high JEDEC moisture level testing and 260ºC reflow. The adhesive is enhanced for bottom die attachment, and it bonds to various organic, ceramic and metal substrates. It is void-free, even on moisture-saturated solder mesh in snap cure mode. The adhesive can be cured on a heated indexer of a die bonder, or in a snap cure oven to eliminate unproductive offline oven cure processes for time consuming multiple die stack applications.
Marine machine screws Designed to withstand salt water and chemicals, these stainless steel machine screws are corrosion resistant and can include chrome plating to eliminate bleeding. They are machined to meet IFI, ASTM and ISO standards. Various stainless grades, head styles, thread types, drives and dimensions are offered.
Insert & tool catalog This company’s new catalog details their line of helical coil inserts and tools. The company has developed tangless inserts and tools, and also offers conventional tanged inserts and tooling. Technical information includes drilling, tapping, gaging, tensile strength, torque and corrosion, as well as installation, application and dimensional data.
Fastening brochure This company’s brochure describes their engineering, international sourcing and support services. Services include application engineering, domestic production, import sourcing and quality assurance. All import parts are tested to the same quality standards as domestic products. ISIRs and PPAPs are available upon request.
Motorsport fasteners Instead of being re-purposed aircraft fasteners, Raceline fasteners have been designed from the ground up to satisfy the needs of motor racing, including high shock and vibration resistance, metal and composite compatibility. Offered are self-retaining studs, long-life floating receptacles, lightweight receptacle mounting plates, and various accessories and tooling.
Liquid metal bonder Designed to repair, rebuild and bond, Durabond 2000ºF liquid metals are
machinable. There is no need for fixturing or clamps with these smooth putties. Cure is at room temperature and hardening starts in an hour. There are no flammable solvents or harsh odors to cause safety concerns. Durabond 7032 stainless steel putty is a ceramic composite material that bonds to high-temperature equipment.
Methacrylate adhesives Agomet methacrylates include 6 adhesives and 4 hardeners that bond substrates via surface activation. This feature allows users to apply hardener/lacquer to a substrate up to 30 days before the resin is added to bond an assembly. They are suited for coating small and large areas with work lives ranging from 1 to 20 min. Cured, the adhesives exhibit lap shear strengths of 3000 to 4000 psi and tensile strengths to 4785
psi.
Plastic fastener TineLok self-locking, vibration-proof nut-and-bolt fasteners are now available in plastic materials, purportedly the first of the type in the industry. Performance characteristics are identical to its metal counterpart, while adding non-corrosiveness and lighter weight. Non-clamp load dependent, the fasteners exhibits greater reverse torque and endures Junker Shaker test cycles without loosening or vibrating.
Wire accessory Adding to this company’s line of wiring accessories, the Push Tie Mount is available in natural colored nylon 6/6 and will fit a 0.244-in. (6.2 mm)
dia. hole and accept wire ties up to 0.299-in. (7.6 mm) wide. The cupped head design assures a firm hold in through-holes cut in panels or blind holes in plastic, masonry or wood.
Custom film adhesives The 400 series of film adhesives is solvent-cast from specialty nylon polyamide resins that provide superior adhesion for various substrates, including nylon,
polyimide, Tedlar, vinyl, metals, fabrics and urethane foams. Custom thermoset or thermoplastic flame retardant forms are available with single or multiple liners. Activation temperatures range from 105º to 110ºC.
Electrical tape Designed to be conformable around uneven magnet wire winds, series 85 electrical tape holds well to magnet wire. With a backing that is polyester web-reinforced and a thermosetting rubber, pressure-sensitive adhesive, this tape is UL recognized for continuous use at 130°C. Applications include motor lead wire hold down, motor end turn taping, coil inner layer, and final wrap insulation and crossover insulation.
Thread protectors The TC series straight cap thread protector meets the functional intent of MIL-C-5501/11, NAS814, MIL-C-5501/3 and NAS832. They are designed to protect straight threads on studs and fittings, and the rolled threads allow either push or thread-on installation. Its tight seal makes is suited as a mask for painting or plating as well as a deterrent for contaminants. Various sizes are available.
Lifting eye bolts This company announces the availability of DIN metric steel lifting eyebolts and lifting eyes. Both versions have a forged steel, annealed zinc-plated body with a machined contact face. During installation, it is necessary to ensure that the face is in firm contact with the mating surface and that the load is not applied across the face of the ring.
Thermally conductive potting compounds Syon Tru-Cast 111 high-density potting and casting resin provides high thermal conductivity and a low coefficient of thermal expansion. This black, aluminum oxide-filled compound can be used also as a structural adhesive to create heat sink lap joints. A choice of three curing agents expands the resin’s range of uses, with different mixed viscosities, pot lives and functional cure times.
Moisture-resistant adhesive Tra-Bond 789-3 single-component, high-strength-toughened adhesive is designed for microelectronic applications, including substrate attachment and package sealing. It retains its bond strength after exposure to moisture, and strongly bonds difficult metals such as gold, silver and copper. The medium viscosity adhesive requires heat cure and is available in a variety of colors.
Self-locking thread patch This company’s Nytemp self-locking fastener has received approval for the new NAS1189 and NAS1190 standards in withstanding high temperatures up to 400°F. The orange patch exceeds the 250°F limit for traditional materials, maintaining its torque and clamp load stability in temperatures up to 450°F. The high-temperature-resistant polymer is applied to both internally and externally threaded parts.
LH050 Pure is an NSF 61 approved anaerobic pipe sealant that is suited for drinking water applications. Filling up the entire space between male and female parts, the sealant can be used on metals such as brass, copper, iron, steel, nickel and aluminum. Once cured, the hardened sealant typically exceeds the burst rating of the pipe and locks parts against vibration loosening. Operating temperature is to 200°C.
Mounting adhesive Crystalbond 555-HMP high melting point thermoplastic adhesive is suited for various electronic materials that require dicing or polishing operations. Material compatibility includes ceramics, glasses and metals. The material flows at 150°F and dissolves readily in hot water. It is transparent in thin cross sections, enabling the user to observe the part during processing.
Rivet system The WatchDawg monitoring/control system ensures consistency and uniformity of orbital-formed rivets. Controls include min./max and variable rate forming force, forming to given height, fixed or variable position at programmable speeds, form to a resulting clamp load between fastened parts, and load cell force up to 20,000 lbs, depending upon machine capacity.
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
Die attach adhesive
Designed to withstand salt water and chemicals, these stainless steel machine screws are corrosion resistant and can include chrome plating to eliminate bleeding. They are machined to meet IFI, ASTM and ISO standards. Various stainless grades, head styles, thread types, drives and dimensions are offered.
This company’s new catalog details their line of helical coil inserts and tools. The company has developed tangless inserts and tools, and also offers conventional tanged inserts and tooling. Technical information includes drilling, tapping, gaging, tensile strength, torque and corrosion, as well as installation, application and dimensional data.
This company’s brochure describes their engineering, international sourcing and support services. Services include application engineering, domestic production, import sourcing and quality assurance. All import parts are tested to the same quality standards as domestic products. ISIRs and PPAPs are available upon request.
Instead of being re-purposed aircraft fasteners, Raceline fasteners have been designed from the ground up to satisfy the needs of motor racing, including high shock and vibration resistance, metal and composite compatibility. Offered are self-retaining studs, long-life floating receptacles, lightweight receptacle mounting plates, and various accessories and tooling.
Designed to repair, rebuild and bond, Durabond 2000ºF liquid metals are
machinable. There is no need for fixturing or clamps with these smooth putties. Cure is at room temperature and hardening starts in an hour. There are no flammable solvents or harsh odors to cause safety concerns. Durabond 7032 stainless steel putty is a ceramic composite material that bonds to high-temperature equipment.
Agomet methacrylates include 6 adhesives and 4 hardeners that bond substrates via surface activation. This feature allows users to apply hardener/lacquer to a substrate up to 30 days before the resin is added to bond an assembly. They are suited for coating small and large areas with work lives ranging from 1 to 20 min. Cured, the adhesives exhibit lap shear strengths of 3000 to 4000 psi and tensile strengths to 4785
psi.
TineLok self-locking, vibration-proof nut-and-bolt fasteners are now available in plastic materials, purportedly the first of the type in the industry. Performance characteristics are identical to its metal counterpart, while adding non-corrosiveness and lighter weight. Non-clamp load dependent, the fasteners exhibits greater reverse torque and endures Junker Shaker test cycles without loosening or vibrating.
Adding to this company’s line of wiring accessories, the Push Tie Mount is available in natural colored nylon 6/6 and will fit a 0.244-in. (6.2 mm)
dia. hole and accept wire ties up to 0.299-in. (7.6 mm) wide. The cupped head design assures a firm hold in through-holes cut in panels or blind holes in plastic, masonry or wood.
The 400 series of film adhesives is solvent-cast from specialty nylon polyamide resins that provide superior adhesion for various substrates, including nylon,
polyimide, Tedlar, vinyl, metals, fabrics and urethane foams. Custom thermoset or thermoplastic flame retardant forms are available with single or multiple liners. Activation temperatures range from 105º to 110ºC.
Designed to be conformable around uneven magnet wire winds, series 85 electrical tape holds well to magnet wire. With a backing that is polyester web-reinforced and a thermosetting rubber, pressure-sensitive adhesive, this tape is UL recognized for continuous use at 130°C. Applications include motor lead wire hold down, motor end turn taping, coil inner layer, and final wrap insulation and crossover insulation.
The TC series straight cap thread protector meets the functional intent of MIL-C-5501/11, NAS814, MIL-C-5501/3 and NAS832. They are designed to protect straight threads on studs and fittings, and the rolled threads allow either push or thread-on installation. Its tight seal makes is suited as a mask for painting or plating as well as a deterrent for contaminants. Various sizes are available.
This company announces the availability of DIN metric steel lifting eyebolts and lifting eyes. Both versions have a forged steel, annealed zinc-plated body with a machined contact face. During installation, it is necessary to ensure that the face is in firm contact with the mating surface and that the load is not applied across the face of the ring.
Syon Tru-Cast 111 high-density potting and casting resin provides high thermal conductivity and a low coefficient of thermal expansion. This black, aluminum oxide-filled compound can be used also as a structural adhesive to create heat sink lap joints. A choice of three curing agents expands the resin’s range of uses, with different mixed viscosities, pot lives and functional cure times.
Tra-Bond 789-3 single-component, high-strength-toughened adhesive is designed for microelectronic applications, including substrate attachment and package sealing. It retains its bond strength after exposure to moisture, and strongly bonds difficult metals such as gold, silver and copper. The medium viscosity adhesive requires heat cure and is available in a variety of colors.
This company’s Nytemp self-locking fastener has received approval for the new NAS1189 and NAS1190 standards in withstanding high temperatures up to 400°F. The orange patch exceeds the 250°F limit for traditional materials, maintaining its torque and clamp load stability in temperatures up to 450°F. The high-temperature-resistant polymer is applied to both internally and externally threaded parts.
Crystalbond 555-HMP high melting point thermoplastic adhesive is suited for various electronic materials that require dicing or polishing operations. Material compatibility includes ceramics, glasses and metals. The material flows at 150°F and dissolves readily in hot water. It is transparent in thin cross sections, enabling the user to observe the part during processing.