Linear
sliders and thrusters. Four precision adjustable hard stops, rather
than two, provide absolute stability and repeatability with these sliders
and thrusters. They are also standard-equipped with permanently lubricated
linear ball bearings and steel endplates, where other units offer composite
bearings and aluminum endplates. They are available in cylinder diameters
of 3/4-, 1 1/16- or 1 1/2-inch, and stroke lengths from 1-to 12-inches.
PROMEC, 90 South Park Street, Willamantic, CT 06226. 888-PROMEC-0.
Automatic
balancing system. Can-Balance is a new continuous balancing system designed
to solve problems of imbalance and vibration in rotating devices by compensating
for out-of-balance conditions in twin- and triple-cylinder engines. It has
been integrated with a vibration dampener that controls vibration, decreases
wear on crankshafts and clutches, and increases usable power. Vibratech
Inc, 11980 Walden Ave, Alden, NY 14004-9790. 716-937-7903.
Set point heat switch. The MAXIGARD CT 5000 works with standard J, K, T or E thermocouples
to monitor temperatures in equipment bearings, conveyor belts, industrial
ovens and various industrial processes. The set point heat switch can be
adjusted to trip at a specific over-heat temperature, and will provide alarm
and process control through 5 amp relay contacts. Monitoring temperature
is determined by thermocouple selected. Process Control Systems Inc,
3947 Meadowbrook Rd, Minneapolis, MN 55246. 800-328-0738.
EL
backlighting panels. These ultra thin electroluminescent lighting panels
allow a user to physically alter their shape without need of special tools.
The Proto-Kut panel kit, packaged in quantities suitable for experimenters,
includes one low-voltage lamp powered by two AAA cells, and one high-voltage
lamp powered by a 9VDC input. Each panel measures 5- x 8-in. and they glow
in green and white. Edmund Scientific Co, Industrial Optics Div, Dept
B971, N999 Edscorp Bldg, Barrington, NY 08007. 609-573-6250.
Flexible elastomer for prototyping. E20 is a thermoplastic polyester-based elastomer
for FDM 1650 and FDM 2000 rapid prototyping systems. A flex modulus of 20,000
makes the material ideal for applications such as seals, bushings, protective
boots, hose and tubing, and impact absorbing components. E20 will allow
users of RP systems to model and test devices of flexible design much earlier
in the design process. Stratasys Inc, 14950 Martin Drive, Eden Prairie,
MN 55344-2020. 612-937-3000.
Frameless
motor kits. A choice of eight different brushless, frameless motors
offer high torque to inertia ratios, speeds to 20,000 rpm, and power ratings
up to 5 hp. Rare earth neodymium/iron/boron magnets provide high performance,
and skewed stators help minimize cogging. These frameless motors are available
in sizes from 1.25-in. (31.8 mm) to 10-in. (254 mm), and they accommodate
a wide range of shaft diameters. MFM Technology Inc, 200 13th Avenue,Ronkonkoma,
NY 11779. 516-467-5151.
Compact
motion controller. Designed for detection of underspeed, zero speed
or overspeed conditions on conveyor belts and other rotating equipment,
the Model CMS incorporates precision mechanical and electronic components.
Housed in either aluminum or cast iron, the unit has two sets of output
contacts, which can be used to shut down equipment and/or sound an alarm.
Conveyor Components Company, 130 Seltzer Road, PO Box 167, Croswell,
MI 48422-0167. 800-233-3233.
Circular
connector for low voltages. The Han R 23 connector can be readily used
with motor encoders, analytical instrumentation, and a wide variety of fieldbus
systems. While they are designed for low-voltage applications, these circular
connectors can handle up to 16 amps. They are available with solder, screw-
or PCB-mount termination, and have a vibration-proof locking system. Harting
Inc. of North America, 1370 Bowes Road, Elgin, IL 60123. 847-741-1500.
Positioning
and sequence controller. The WDP3-01X controller is based on a field
proven design, with an upgraded operating system and ProOED programming
software. The controller can be programmed with more position and sequencing
functions than previous models. Pick and place applications include palletizing,
feeding, assembling, gluing, welding, stacking, aligning and many others.
Berger Lahr Motion Technology Inc, 41170 Joy Road, Plymouth, MI 48170.
313-459-8300.
User
interface for industrial applications. The TouchConsole is a self-contained
unit, sealed against dust and fluid sprays, for industrial control and monitoring
applications. Measuring only 12- x 15- x 4-in., it includes a 12.1- or 13.8-in.
back-lit color LCD display, a touch screen, two externally-accessible 3.5-in
drive bays, an Ethernet port, and up to seven RS232/422 serial ports. It
will be offered with a compact thermal printer. Tobias Associates Inc,
50 Industrial Drive, PO Box 2699, Ivyland, PA 18974-0347. 215-322-1500.
MORE
Originally published in the January 1998 issue of designfax.
Please Note: some pictures or diagrams are only available
through the printed media.
Linear
sliders and thrusters. Four precision adjustable hard stops, rather
than two, provide absolute stability and repeatability with these sliders
and thrusters. They are also standard-equipped with permanently lubricated
linear ball bearings and steel endplates, where other units offer composite
bearings and aluminum endplates. They are available in cylinder diameters
of 3/4-, 1 1/16- or 1 1/2-inch, and stroke lengths from 1-to 12-inches.
PROMEC, 90 South Park Street, Willamantic, CT 06226. 888-PROMEC-0.
Automatic
balancing system. Can-Balance is a new continuous balancing system designed
to solve problems of imbalance and vibration in rotating devices by compensating
for out-of-balance conditions in twin- and triple-cylinder engines. It has
been integrated with a vibration dampener that controls vibration, decreases
wear on crankshafts and clutches, and increases usable power. Vibratech
Inc, 11980 Walden Ave, Alden, NY 14004-9790. 716-937-7903. 
works with standard J, K, T or E thermocouples
to monitor temperatures in equipment bearings, conveyor belts, industrial
ovens and various industrial processes. The set point heat switch can be
adjusted to trip at a specific over-heat temperature, and will provide alarm
and process control through 5 amp relay contacts. Monitoring temperature
is determined by thermocouple selected. Process Control Systems Inc,
3947 Meadowbrook Rd, Minneapolis, MN 55246. 800-328-0738. 
EL
backlighting panels. These ultra thin electroluminescent lighting panels
allow a user to physically alter their shape without need of special tools.
The Proto-Kut panel kit, packaged in quantities suitable for experimenters,
includes one low-voltage lamp powered by two AAA cells, and one high-voltage
lamp powered by a 9VDC input. Each panel measures 5- x 8-in. and they glow
in green and white. Edmund Scientific Co, Industrial Optics Div, Dept
B971, N999 Edscorp Bldg, Barrington, NY 08007. 609-573-6250. 
thermoplastic polyester-based elastomer
for FDM 1650 and FDM 2000 rapid prototyping systems. A flex modulus of 20,000
makes the material ideal for applications such as seals, bushings, protective
boots, hose and tubing, and impact absorbing components. E20 will allow
users of RP systems to model and test devices of flexible design much earlier
in the design process. Stratasys Inc, 14950 Martin Drive, Eden Prairie,
MN 55344-2020. 612-937-3000. 
Frameless
motor kits. A choice of eight different brushless, frameless motors
offer high torque to inertia ratios, speeds to 20,000 rpm, and power ratings
up to 5 hp. Rare earth neodymium/iron/boron magnets provide high performance,
and skewed stators help minimize cogging. These frameless motors are available
in sizes from 1.25-in. (31.8 mm) to 10-in. (254 mm), and they accommodate
a wide range of shaft diameters. MFM Technology Inc, 200 13th Avenue,Ronkonkoma,
NY 11779. 516-467-5151. 
Compact
motion controller. Designed for detection of underspeed, zero speed
or overspeed conditions on conveyor belts and other rotating equipment,
the Model CMS incorporates precision mechanical and electronic components.
Housed in either aluminum or cast iron, the unit has two sets of output
contacts, which can be used to shut down equipment and/or sound an alarm.
Conveyor Components Company, 130 Seltzer Road, PO Box 167, Croswell,
MI 48422-0167. 800-233-3233. 
Circular
connector for low voltages. The Han R 23 connector can be readily used
with motor encoders, analytical instrumentation, and a wide variety of fieldbus
systems. While they are designed for low-voltage applications, these circular
connectors can handle up to 16 amps. They are available with solder, screw-
or PCB-mount termination, and have a vibration-proof locking system. Harting
Inc. of North America, 1370 Bowes Road, Elgin, IL 60123. 847-741-1500.
Positioning
and sequence controller. The WDP3-01X controller is based on a field
proven design, with an upgraded operating system and ProOED programming
software. The controller can be programmed with more position and sequencing
functions than previous models. Pick and place applications include palletizing,
feeding, assembling, gluing, welding, stacking, aligning and many others.
Berger Lahr Motion Technology Inc, 41170 Joy Road, Plymouth, MI 48170.
313-459-8300. 
User
interface for industrial applications. The TouchConsole is a self-contained
unit, sealed against dust and fluid sprays, for industrial control and monitoring
applications. Measuring only 12- x 15- x 4-in., it includes a 12.1- or 13.8-in.
back-lit color LCD display, a touch screen, two externally-accessible 3.5-in
drive bays, an Ethernet port, and up to seven RS232/422 serial ports. It
will be offered with a compact thermal printer. Tobias Associates Inc,
50 Industrial Drive, PO Box 2699, Ivyland, PA 18974-0347. 215-322-1500.
MORE