Product News

Cord protectors. Flexible and expandable plastic sleevings come in a wide range of materials, sizes and colors for protecting, bundling and organizing power cords, cable systems and pneumatic hoses. Nelco Products Inc, Pembroke, MA. Free info--Circle 588. http://www.OneRS.net/102df-588 

Vacuum & pilot actuators. Vacuum and pilot actuators in the Minimatic line remotely operate directional control valves using a pressure or vacuum signal. They may be combined with push operated 2-, 3- or 4-way valves with a 15/32-32 mounting thread. Clippard Instrument Laboratory, Cincinnati, OH. Free info--Circle 589. http://www.OneRS.net/102df-589

Adhesive dispensing. Providing precise ratio control, safety and minimal waste, Dev-Tube dispensing cartridges hold 25 ml of two-component adhesive. The snap-off cap reseals the tube after use, eliminating the need for a knife or razor. The single-plunger design guarantees correct ratio-dispensing for optimum strength bonds. A snap-out mixing stick molded into the plunger handle expedites mixing and cleanup. Devcon, Danvers, MA. Free info--Circle 593. http://www.OneRS.net/102df-593

Control handle. These egonomically-shaped handles have zinc die-cast bodies with a black powder-coated pebble finish, while the revolving handle is made of black phenolic plastic. This handle has a ribbed surface that allows a balanced pressure to be applied during hand grip operation. For easy installation, the hub is pre-drilled with pilot holes, and modifications such as set-screw holes and cross holes are also available. JW Winco Inc, New Berlin, WI. Free info--Circle 596.

http://www.OneRS.net/102df-596

Serrated grippers. Straight serration grippers use a linear tooth pattern to increase directional holding power, providing more grip area and strength than traditional diamond style grippers, and thus, minimizing witness marks. These grippers are designed for turning and chuck jaw applications where extreme rotational torque must be kept in check. Grippers are available in various sizes and serration pitch. Fairlane Products Inc, Troy, MI. Free info--Circle 590.

http://www.OneRS.net/102df-590 

Inclinometers. Several models of weatherproof glass-tube slope indicators, include a unit that emits audible tone when a pre-set limit is reached. The tube can be painted with warning markers, and a remote sensor version is also available. R & B Mfg Inc, Riverside, MO. Free info--Circle 480.

http://www.OneRS.net/102df-480

Relays. Universal Releco Interfacer relays link PC or PLC logic to machine action, with AC and DC in the same unit with a built-in surge suppressor. The universal-polarity socket satisfies voltage requirements from 12 VDC to 230 VAC. TURCK Inc, Minneapolis, MN. Free info--Circle 481. http://www.OneRS.net/102df-481 

Heat transfer fluid. Designed for process heating and cooling applications, MR transfer fluid has high stability that permits system temperatures to 550°F. Low viscosity allows efficient cooling to 30°F. Environmentally safe, the fluid is non-toxic and can be combined with used lubricating oils for recycling. A low vapor pressure of 3.19 psi at 550°F reduces need for pressurization to prevent cavitation and fluid boiling. Paratherm Corp, Conshohocken, PA. Free info--Circle 482.

http://www.OneRS.net/102df-482 

Battery holders. Self-contained Densi-Pak holders for AA and AAA batteries have self-adjusting contact springs to compensate for variations in battery length. Snap-lock covers protect batteries and increase resistance to shock and vibration. Keystone Electronics Corp, Astoria, NY. Free info--Circle 591. http://www.OneRS.net/102df-591

Barbed luers. Medical grade male and female luers and accessories accommodate tube sizes from 1/16- to 1/4-in. The single barb design with no parting line ensures proper connection. A wide range of colors, materials and sterilization properties is available. Value Plastics Inc, Fort Collins, CO. Free info--Circle 592. http://www.OneRS.net/102df-592

Liquid dispenser. The DSP501A-4 multiple-nozzle dispenser allows up to 4 simultaneous applications of assembly fluids, including adhesives, solvents, marking inks and various lubricants from oil to thick grease. With timing intervals from 0.01 to 30 sec, it can dispense microdots or be used for potting components. It also includes a vacuum system on the fluid line for non-drip application of low-viscosity fluids. I&J Fisnar Inc, Fair Lawn, NJ. Free info--Circle 594.

http://www.OneRS.net/102df-594

Remote motor control. For outdoor or indoor applications where Class I and Class II hazards are present, XFS control stations may be used in conjunction with magnetic starters or contactors to remotely control motors. The factory-sealed control stations eliminate the need for poured seals, saving installation time. The stations' bodies and covers are made from lightweight, corrosion-resistant, copper-free aluminum. Adalet, Cleveland, OH. Free info--Circle 595.

http://www.OneRS.net/102df-595

Pipe, hose and nozzle fittings. Nylon and propylene fittings are available in sizes ranging from 1/8- to 2-in. Configurations include thread-to-thread, barb-to-thread and barb-to-barb. Nylon and propylene fittings are generally acceptable for pressures up to 150 psi at room temperature with lower pressures allowing 175°F. Other low-pressure fluid handling and control components are also available. Real-Time Industrial Supply Co, City, ST. Free info--Circle 599. http://www.OneRS.net/102df-599