Made of spring-tempered stainless steel fusion-bonded with thermosetting polymer resin, Spring-Fast Flexi-Grommet edging material can be used in applications where cabling or other materials must be protected against abrasion damage from metal edges. It has been tested for resistance to vibration, shock, immersion and salt spray. The Flexi-Grommet material can be used in such applications as aircraft assembly, medical and telecommunications equipment, computers and peripherals. It mechanically locks on with finger pressure rather than adhesives, requiring less installation time. The material is available for nominal sheet thicknesses of 0.32-, 0.050-. 0.063- and 0.090-in.
Device Technologies Inc, Marlborough, MA. Free info—Circle 262.
www.rsleads.com/202df-262
Floor hatch. The Access floor hatch is a flexible method of terminating under-floor voice, data and power cables at a single location. Developed for use with raised floors, the interchangeable hatch allows wire management in new or retrofit applications.
P Feiner & Sons Inc, Bogata, NJ. Free info—Circle 257.
www.rsleads.com/202df-257
Wall-mount enclosures.
The 10-in. deep Concept wall-mount enclosures are available in 20 different sizes. They feature flush latching and hidden hinges for smooth appearance and a durable powder paint finish. The enclosures are rated UL 508 Type 4 and 12.
Hoffman, Anoka, MN. Free info—Circle 260. www.rsleads.com/202df-260
Enclosure accessories.
Kooltronic air-cooled panel-mounted air conditioners are offered in both NEMA 3R and NEMA
4/4X models. The UL/cUL-listed units are available with cooling capacities ranging from 1,000 to 12,000 BTU/hr.
AD Products Co, Cleveland, OH. Free info—Circle 263.
www.rsleads.com/202df-263
Compression latch. The Folding T-handle compression latch provides effective sealing against environmental contaminants. The latch provides 6.4mm of consistent pull-up compression, eliminating shock and vibration. Southco,
Concordville, PA. Free info—Circle 255. www.rsleads.com/202df-255
Pleated filter. The Type DP8 filter is available with a MERV 8 rating per ASHRAE Standard 52.2. The filter has a proprietary media that is made from 100% synthetic fibers enhanced with an electrostatic charge for increased efficiency.
Airguard, Louisville, KY. Free info—Circle 256.
www.rsleads.com/202df-256
Heat exchangers. ProAir heat exchangers feature a modified heat pipe core that provides efficient heat exchange, preventing excessive heat rise inside the cabinet. A closed-loop design ensures that unclean, ambient air circulates separately from the clean enclosure air, thereby maintaining the integrity of the enclosure and extending the life of the electronics. Three ProAir models are available.
APW Thermal Management, Champlin, MN. Free info—Circle 267.
www.rsleads.com/202df-267
PCI system. The Schroff Pro Series 9U/8-slot CompactPCI NEBS-ready system is compatible with IEEE 1101.10, 1101.11 and CompactPCI. It accepts eight 6U x 160mm cards as well as an 8HP CPU from the front.
Pentair Electronic Packaging, Warwick, RI. Free info—Circle 259.
www.rsleads.com/202df-259
Accessible enclosures. The 503 Series PCI/ISA chassis incorporates lightweight aluminum construction with an easy-to-use design. It features front access to peripherals and fans as well as single-tool, single-screw accessibility to all internal boards.
CG Mupac, Brockton, MA. Free info—Circle 258. www.rsleads.com/202df-258
Bifurcator fans. This 20-page brochure describes Barry Blower’s Axcentrix Bifurcator fan line. Both the BFD direct-drive line and the BFB belt drive fans are detailed. These inline, axial centrifugal blowers are designed to move large volumes of air against high static pressures in applications that require the exhaustion of hot air, corrosive gases or flammable fumes. They are available in wheel diameters from 14- to 45-in.
Lau Industries, Minneapolis, MN. Free info—Circle 268.
www.rsleads.com/202df-268
Ball bearing slide. The Model 2907 is a narrow, 0.38-in. wide ball bearing slide that offers movement and mounting flexibility for 1U to 4U rack applications. It features a low profile and carries loads up to 100 pounds.
Accuride International Inc, Santa Fe Springs, CA. Free info—Circle 261.
www.rsleads.com/202df-261
T-frame enclosure. The T-Frame test and development system features an open-frame design as well as a comprehensive set of chassis management and monitoring functions, enabling developers to access and monitor installed boards without extender cards. The most recent enclosure version adds a CompactPCI Packet Switching Backplane (cPCI/PSB).
Tracewell Systems Inc, Westerville, OH. Free info—Circle 269.
www.rsleads.com/202df-269
Wall mount cabinets. The 19-in. Space Saver wall mount cabinets are designed for back-room systems, tight space requirements and network component organization. They are available in three heights and two depths.
Optima Electronic Packaging Systems, Tucker, GA. Free info—Circle 273.
www.rsleads.com/202df-273
Thermoelectric air conditioner. The Model #AAC-140B-4XT air conditioner enables small electronic packages to be cooled directly from a 120/240 VAC power source. The 400 BTU unit operates on nominal 150 VAC input and performs well over the 100-130 VAC range. It expels power supply waste heat with the outside exhaust air so that the cooling performance is not materially reduced.
Electrografics International Corp, Warminster, PA. Free info—Circle
271.
www.rsleads.com/202df-271
Electronic enclosures. The CU series die cast aluminum Econoboxes features 15 box sizes ranging from 3.62- x 1.50- x 1.21-in. to 7.5- x 7.5- x 2.62-in and weigh between 0.25- to 2 lbs. They have close-fitting flanged covers.
Bud Industries Inc, Willoughby, OH. Free info—Circle 265.
www.rsleads.com/202df-265
T-slotted extrusions. These metric extrusions are available in both a 25mm series and a 40mm series. Featuring a smooth surface and the ability to use either fractional or metric hardware, the extrusions are cost-effective when compared to welded steel structures. Applications include machine frames, cleanrooms, machine guards/enclosures and material handling equipment.
80/20 Inc, Columbia City, IN. Free info—Circle 274.
www.rsleads.com/202df-274
Mount box support. The CADDY FMBS16 floor mount box support positions the center of electrical boxes 16-in. above the floor to comply with the American with Disabilities Act Accessibility Guideline Standards.
Erico Inc, Solon, OH. Free info—Circle 266. www.rsleads.com/202df-266
Fire suppression. Designed for enclosures under 250 cu. ft., this computer/instrument fire suppression system features flexible polymer tubing that can be installed anywhere within an enclosure. When the tubing is exposed to flame, it ruptures, actuating any outside sprinkling system and releasing a clean suppression agent, such as FM-200 or CO2. No electricity or external power is required. Systems are fully customizable.
Firetrace International, Scottsdale, AZ.www.rsleads.com/202df-755
Would You Like A Reprint of
An Article? CLICK HERE!
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
Top Product
Floor hatch. The Access floor hatch is a flexible method of terminating under-floor voice, data and power cables at a single location. Developed for use with raised floors, the interchangeable hatch allows wire management in new or retrofit applications.
P Feiner & Sons Inc, Bogata, NJ. Free info—Circle 257.
Wall-mount enclosures.
The 10-in. deep Concept wall-mount enclosures are available in 20 different sizes. They feature flush latching and hidden hinges for smooth appearance and a durable powder paint finish. The enclosures are rated UL 508 Type 4 and 12.
Hoffman, Anoka, MN. Free info—Circle 260. 
Enclosure accessories.
Kooltronic air-cooled panel-mounted air conditioners are offered in both NEMA 3R and NEMA
4/4X models. The UL/cUL-listed units are available with cooling capacities ranging from 1,000 to 12,000 BTU/hr.
AD Products Co, Cleveland, OH. Free info—Circle 263.
Compression latch. The Folding T-handle compression latch provides effective sealing against environmental contaminants. The latch provides 6.4mm of consistent pull-up compression, eliminating shock and vibration. Southco,
Concordville, PA. Free info—Circle 255. 
Pleated filter. The Type DP8 filter is available with a MERV 8 rating per ASHRAE Standard 52.2. The filter has a proprietary media that is made from 100% synthetic fibers enhanced with an electrostatic charge for increased efficiency.
Airguard, Louisville, KY. Free info—Circle 256.
Heat exchangers. ProAir heat exchangers feature a modified heat pipe core that provides efficient heat exchange, preventing excessive heat rise inside the cabinet. A closed-loop design ensures that unclean, ambient air circulates separately from the clean enclosure air, thereby maintaining the integrity of the enclosure and extending the life of the electronics. Three ProAir models are available.
APW Thermal Management, Champlin, MN. Free info—Circle 267.
PCI system. The Schroff Pro Series 9U/8-slot CompactPCI NEBS-ready system is compatible with IEEE 1101.10, 1101.11 and CompactPCI. It accepts eight 6U x 160mm cards as well as an 8HP CPU from the front.
Pentair Electronic Packaging, Warwick, RI. Free info—Circle 259.
Accessible enclosures. The 503 Series PCI/ISA chassis incorporates lightweight aluminum construction with an easy-to-use design. It features front access to peripherals and fans as well as single-tool, single-screw accessibility to all internal boards.
CG Mupac, Brockton, MA. Free info—Circle 258. 
Bifurcator fans. This 20-page brochure describes Barry Blower’s Axcentrix Bifurcator fan line. Both the BFD direct-drive line and the BFB belt drive fans are detailed. These inline, axial centrifugal blowers are designed to move large volumes of air against high static pressures in applications that require the exhaustion of hot air, corrosive gases or flammable fumes. They are available in wheel diameters from 14- to 45-in.
Lau Industries, Minneapolis, MN. Free info—Circle 268.
Ball bearing slide. The Model 2907 is a narrow, 0.38-in. wide ball bearing slide that offers movement and mounting flexibility for 1U to 4U rack applications. It features a low profile and carries loads up to 100 pounds.
Accuride International Inc, Santa Fe Springs, CA. Free info—Circle 261.
T-frame enclosure. The T-Frame test and development system features an open-frame design as well as a comprehensive set of chassis management and monitoring functions, enabling developers to access and monitor installed boards without extender cards. The most recent enclosure version adds a CompactPCI Packet Switching Backplane (cPCI/PSB).
Tracewell Systems Inc, Westerville, OH. Free info—Circle 269.
Wall mount cabinets. The 19-in. Space Saver wall mount cabinets are designed for back-room systems, tight space requirements and network component organization. They are available in three heights and two depths.
Optima Electronic Packaging Systems, Tucker, GA. Free info—Circle 273.
Thermoelectric air conditioner. The Model #AAC-140B-4XT air conditioner enables small electronic packages to be cooled directly from a 120/240 VAC power source. The 400 BTU unit operates on nominal 150 VAC input and performs well over the 100-130 VAC range. It expels power supply waste heat with the outside exhaust air so that the cooling performance is not materially reduced.
Electrografics International Corp, Warminster, PA. Free info—Circle
271.
Electronic enclosures. The CU series die cast aluminum Econoboxes features 15 box sizes ranging from 3.62- x 1.50- x 1.21-in. to 7.5- x 7.5- x 2.62-in and weigh between 0.25- to 2 lbs. They have close-fitting flanged covers.
Bud Industries Inc, Willoughby, OH. Free info—Circle 265.
T-slotted extrusions. These metric extrusions are available in both a 25mm series and a 40mm series. Featuring a smooth surface and the ability to use either fractional or metric hardware, the extrusions are cost-effective when compared to welded steel structures. Applications include machine frames, cleanrooms, machine guards/enclosures and material handling equipment.
80/20 Inc, Columbia City, IN. Free info—Circle 274.
Mount box support. The CADDY FMBS16 floor mount box support positions the center of electrical boxes 16-in. above the floor to comply with the American with Disabilities Act Accessibility Guideline Standards.
Erico Inc, Solon, OH. Free info—Circle 266. 
Fire suppression. Designed for enclosures under 250 cu. ft., this computer/instrument fire suppression system features flexible polymer tubing that can be installed anywhere within an enclosure. When the tubing is exposed to flame, it ruptures, actuating any outside sprinkling system and releasing a clean suppression agent, such as FM-200 or CO2. No electricity or external power is required. Systems are fully customizable.
Firetrace International, Scottsdale, AZ.