Bearings,
Booth 241 The Explorer Angular Contact Ball Bearing (ACBB) is
designed to withstand tough pump operating conditions. The
ACBB bearings can be used in place of conventional bearings in
existing designs, increasing the designer’s options for
using different impellers within the same basic pump size. In
addition, they provide increased ability to handle cavitation.
Adhesive guide,
Booth 432 Intended to assist in the specification of adhesives for
product assembly, the Engineering Adhesive Solutions Guide
provides data that includes viscosity, gap fill, set times,
temperature ranges and specific test values. The guide covers
a broad range of adhesive chemistries and product application
areas. Two pages are devoted to each adhesive chemistry and
each market served.
Threadlocker sticks,
Booth 639 Loctite 248 and Loctite 268 deliver the same performance
characteristics of liquid threadlockers without leaks or
drips. Loctite 248 Blue is a medium-strength threadlocker
stick for use with all types of threaded metal fasteners.
Loctite 268 Red is a high-strength threadlocker stick suitable
for heavy-duty applications. Both are packaged in 19g and 9g
self-feeding stick applicators.
Hook & loop strips,
Booth 934 Tak-Tape hook and loop fasteners are designed for
general-purpose cable bundling. The tape comes in a large
continuous roll that can be cut to size with Telco snips or a
cutter from the company. Rolls are available in 20- and 35-ft
lengths. The thin, flexible material is designed to speed
installation and is adjustable, releasable and reusable for
versatility.
Card cages,
Booth 1043
Custom-made card cages and sub-rack chassis are offered with a
guarantee of an exact fit while meeting nearly any board
standard. Cages can be any length, width, depth or spacing.
Industry standards such as EIA, VME, VXI and Compact PCI can
be accommodated, and special front panels with labeling or
silk-screened logos can be applied during manufacture.
Compact brake,
Booth 1441 Based on using mechanical leverage to amplify the force of
the friction linings against the respective opposing friction
surface, the backlash-free, spring-applied SEMO-Brake displays
high torque for its size. This brake can be released using
electromagnetic, pneumatic or hydraulic force. The brake can
be installed in horizontal or vertical position or at any
angle.
On-line lubrication tips,
Booth 1223 101 Smart Lubrication Tips is a downloadable pdf file with
graphics and easy-to-read charts that offer solutions to
common lubrication problems. The guide features such
categories as rolling-element bearings, seals and packings,
linear motion guides, vacuum pumps and air compressors,
hydraulic pump and general maintenance and repairs.
Lubrication system,
Booth 1619 Available for the company’s ball screws, linear guides
and actuators, linear motors and robot modules, K1 lubrication
units offer lifetime maintenance-free operation. The units
consist of a mineral oil impregnated polyolefin resin that
deposits fresh oil as it moves along the raceway. An
FDA-compliant system is available for medical and food
applications.
Locking pin,
Booth 1927
The Wedge Lock Pin features a solid, spring-loaded
wedge-shaped detent that easily depresses automatically when
the pin is inserted. Once fully inserted through both pieces
of material, the plunger springs back, locking the pin
securely with a vertical rear face. No tools are needed and
loose cotter pins with sharp ends are eliminated. Configurable
to suit the application, the pins can be produced in a clevis
pin head style, grab ring style or other styles, with various
materials and finishes.
Power transmission,
Booth 1942
This company strives to provide an "infinite line"
of short-run precision plastic power drive components to a
wide range of industries, primarily in SIC codes 3000 and
4000. The product line includes stock, modified stock and
full-custom parts, such as spur gears, gear blanks, worm
gears, timing belt pulleys, sprockets and couplers.
Retaining rings,
Booth 2127
This company supplies various retaining rings from
spiral-wound to round- and square-section, snap rings and disc
springs. Both metric and inch sizes are available in a variety
of standard and custom sizes. Materials include steel
phosphate coated, cadmium or zinc plated, passivated stainless
steel, carbon spring steel, bronze and beryllium copper.
Cable & hose guide,
Booth 2423 Suited for robotic applications performing linear and
radial movements in confined spaces, the Triflex R Energy
Chain features a tubular design that ensures fluid multi-axis
mobility and prevents the Energy Chain from catching on
equipment. Its trailer-hitch style modular assembly offers
high tensile strength and flexibility without additional steel
cables.
Electric slip clutch,
Booth 2630
The Electro Slip clutch uses the proprietary asbestos-free
friction system that results in static friction being less
than dynamic friction. Torque is gradually applied and
electronically controlled, enabling change during operation or
quick setup. No suddenly-applied load is transmitted through
the mechanism, thereby reducing shock. Typical lifetime for
continuous or intermittent slip is 30 million cycles.
Elastomer couplings,
Booth 2842 Specifically designed to mount to hollow bores with an
expanding tapered clamping element, the EK7 series of
high-precision elastomer couplings is suited for belt-driven
linear actuators. The coupling does not require a shaft
adapter to couple the pulley to a motor or gear head. Moment
of inertia is very low for high-speed servo applications where
rapid acceleration/deceleration cycles exist.
Rivet nuts,
Booth 2932
The CFT and CFW series of rivet nuts provides strong threads
in nearly any material thickness. They grip the surface of the
hole by pulling the lower section of the rivet nut into the
upper section. This 360-degree swaging of the upper section
provides the fastening point for the rivet nut. The CFT nut is
designed for almost any materials, while the CFW has a
diamond-knurled body suited for fiberglass and wood
applications. Finish is cadmium- and chrome-free.
Cable & hose carriers,
Booth 3239
The illustrated bulletin NP-100 features the NP series cable
and hose carrier, which combines greater strength with lighter
weight. They maintain proper bend radii for air, hydraulic and
electric lines to prevent fatigue and excessive wear during
operation. Dimensional data for sizing and mounting are
included, and the NP design is available in eight widths from
1- to 7-in.
Tooling component library,
Booth 3053 An extensive library of tooling components for workholding,
positioning and fixture construction is offered, free of
charge at this company’s website. Viewable as 2D and 3D
solid models, each part is presented in formats for nearly all
CAD systems. The use of 3D PartStream.net to power the catalog
allows users to preview parts by dynamically rotating them in
space.
Thread inserts,
Booth 3329
Re-Nu-Thread inserts are designed to repair damaged threads
and provide load-bearing threads in soft material. Machined
from bar stock, these solid wall inserts have standard
external threads that permit the use of standard drills and
taps — special installation tools are not required. Steel or
stainless sizes range from #4 to 1-in., and metric sizes from
M3 to M18.
Thin retaining rings,
Booth 3432
This company has unveiled a series of thinner, lightweight and
economical retaining rings to handle light or medium thrust
loads. The rings are designed to fit into a much narrower
machined grove. These spiral-wound, 2-turn rings provide a
360-degree retaining surface and are suited for both internal
and external applications.
Lifting eye bolts,
Booth 3435
This company announces the availability of DIN metric steel
lifting eyebolts and lifting eyes. Both versions have a forged
steel, annealed zinc-plated body with a machined contact face.
During installation, it is necessary to ensure that the face
is in firm contact with the mating surface and that the load
is not applied across the face of the ring.
Rollers, bumpers, workholding & positioning,
Booth 3543
Rollers include solid rollers from 1 ˝ to 4-in. dia.,
DuraSoft rollers from 2˝- to 4-in. dia. and finned rollers
from 2- to 4-in. dia., in 1- and 2-in. widths. Bumpers are
available in round, square and rectangular shapes in a variety
of standard and custom durometers and materials. Their new
line of Accu-Thrust thrust screws (both threaded, set screw
type and headed, socket head cap screw type) will be on
display.
Grommet edging,
Booth 3735
The Slim-Lok snag-free composite grommet edging is a
specialized member of the Spring-Fast family, which is NEDBS
and UL94V-0 compliant. Smooth, nylon-coated stainless steel,
encapsulated in a thermoplastic elastomer cushion, will not
abrade or snag wire ties on cable harnesses, fiber optic
cables or cables that are likely to move over time. They are a
VOC-free alternative to adhesive-applied grommets.
Gooseneck arms,
Booth 3737
Custom flexible steel arms (goosenecks) are available in
various diameters, fittings, brackets, mounts and colors. The
strong, vinyl-covered flex arms support medical and electronic
applications. Many standard internal and external threads are
available. A quick-connect coupler system, and magnetic,
C-clamp and weighted bases are offered.
Double universal joints,
Booth 3839
A series of 12 stainless steel, zero-backlash, double
universal joints with ball splines features telescoping
extension slides designed for use where, owing to axial
motion, the distance between driver and driven shafts may vary
up to 6 mm. Five miniature models transmit power and a max
operating angle of 60-degrees at max speed of 10,000 rpm @ 0
degrees. Seven inverted models transmit power at max 40-degree
angle and max operating speed of 4000 rpm @ 0 degrees.
Self-locking fasteners,
Booth 3941 Designed to address high temperature and vibration
problems, the Dual-Lok self-locking process uses a Vespel
element pressed into an off-center holes through the bolt. No
glue is required and two locking surfaces make the lock even
more secure. These fasteners can withstand high and low
temperature cycling (-450° to 500°F) through at least 15
removals.
Brake pad attachment,
Booth 4149 Designed for attaching brake disc pads quickly and
economically, the FeinGrip fineblanked pad attachment system
meets stringent specs for strength and dimensional tolerances.
Its steel brake plate features an array of integral, precisely
angled teeth that lock pad to plate when friction material is
molded and cured around the teeth. In-process restriking/sizing
ensures proper flatness for minimal vibration and chatter
under load.
Online CAD support,
Booth 4439
As part of their online catalog, this company offers Solid
Gold CAD support system that allows users to view and
manipulate over 9000 stock springs, and download both 2D and
3D CAD models for use in their designs. Non-CAD users may save
viewed images in jpeg or tif format. A print or CD-ROM version
of the catalog are also available.
Quarter-turn fastener,
Booth 4444
In its simple form, the Bi-Fix quarter turn fastener uses just
finger pressure to click the fastener into locked position.
This connection will not open by vibration or shock less than
100g. Under axial tension, the fasteners become more form fit
until maximum load. A spring clip ejects the latch when it is
turned 90 degrees in either direction.
Heat pipe cooling,
Booth 5536
This company produces a broad range of heat transfer devices
for sealed enclosures, incorporating air-to-air heat pipe
technology. Besides cooling and recirculating the clean air
within a cabinet, it also maintains the enclosure’s seal
against contaminants. The Freon-free devices have a low power
draw, are corrosion resistant, and are offered in oil-cooling
and explosion-proof models.
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
The Explorer Angular Contact Ball Bearing (ACBB) is
designed to withstand tough pump operating conditions. The
ACBB bearings can be used in place of conventional bearings in
existing designs, increasing the designer’s options for
using different impellers within the same basic pump size. In
addition, they provide increased ability to handle cavitation.
Adhesive guide, 
Loctite 248 and Loctite 268 deliver the same performance
characteristics of liquid threadlockers without leaks or
drips. Loctite 248 Blue is a medium-strength threadlocker
stick for use with all types of threaded metal fasteners.
Loctite 268 Red is a high-strength threadlocker stick suitable
for heavy-duty applications. Both are packaged in 19g and 9g
self-feeding stick applicators.
Hook & loop strips,
Custom-made card cages and sub-rack chassis are offered with a
guarantee of an exact fit while meeting nearly any board
standard. Cages can be any length, width, depth or spacing.
Industry standards such as EIA, VME, VXI and Compact PCI can
be accommodated, and special front panels with labeling or
silk-screened logos can be applied during manufacture.
Compact brake, 
101 Smart Lubrication Tips is a downloadable pdf file with
graphics and easy-to-read charts that offer solutions to
common lubrication problems. The guide features such
categories as rolling-element bearings, seals and packings,
linear motion guides, vacuum pumps and air compressors,
hydraulic pump and general maintenance and repairs.
Lubrication system,
The Wedge Lock Pin features a solid, spring-loaded
wedge-shaped detent that easily depresses automatically when
the pin is inserted. Once fully inserted through both pieces
of material, the plunger springs back, locking the pin
securely with a vertical rear face. No tools are needed and
loose cotter pins with sharp ends are eliminated. Configurable
to suit the application, the pins can be produced in a clevis
pin head style, grab ring style or other styles, with various
materials and finishes.
Power transmission, 
This company supplies various retaining rings from
spiral-wound to round- and square-section, snap rings and disc
springs. Both metric and inch sizes are available in a variety
of standard and custom sizes. Materials include steel
phosphate coated, cadmium or zinc plated, passivated stainless
steel, carbon spring steel, bronze and beryllium copper.
Cable & hose guide,
The Electro Slip clutch uses the proprietary asbestos-free
friction system that results in static friction being less
than dynamic friction. Torque is gradually applied and
electronically controlled, enabling change during operation or
quick setup. No suddenly-applied load is transmitted through
the mechanism, thereby reducing shock. Typical lifetime for
continuous or intermittent slip is 30 million cycles.
Elastomer couplings,
The CFT and CFW series of rivet nuts provides strong threads
in nearly any material thickness. They grip the surface of the
hole by pulling the lower section of the rivet nut into the
upper section. This 360-degree swaging of the upper section
provides the fastening point for the rivet nut. The CFT nut is
designed for almost any materials, while the CFW has a
diamond-knurled body suited for fiberglass and wood
applications. Finish is cadmium- and chrome-free.
Cable & hose carriers, 
An extensive library of tooling components for workholding,
positioning and fixture construction is offered, free of
charge at this company’s website. Viewable as 2D and 3D
solid models, each part is presented in formats for nearly all
CAD systems. The use of 3D PartStream.net to power the catalog
allows users to preview parts by dynamically rotating them in
space.
Thread inserts, 
This company has unveiled a series of thinner, lightweight and
economical retaining rings to handle light or medium thrust
loads. The rings are designed to fit into a much narrower
machined grove. These spiral-wound, 2-turn rings provide a
360-degree retaining surface and are suited for both internal
and external applications.
Lifting eye bolts, 
Rollers include solid rollers from 1 ˝ to 4-in. dia.,
DuraSoft rollers from 2˝- to 4-in. dia. and finned rollers
from 2- to 4-in. dia., in 1- and 2-in. widths. Bumpers are
available in round, square and rectangular shapes in a variety
of standard and custom durometers and materials. Their new
line of Accu-Thrust thrust screws (both threaded, set screw
type and headed, socket head cap screw type) will be on
display.
Grommet edging, 
Custom flexible steel arms (goosenecks) are available in
various diameters, fittings, brackets, mounts and colors. The
strong, vinyl-covered flex arms support medical and electronic
applications. Many standard internal and external threads are
available. A quick-connect coupler system, and magnetic,
C-clamp and weighted bases are offered.
Double universal joints, 
Designed to address high temperature and vibration
problems, the Dual-Lok self-locking process uses a Vespel
element pressed into an off-center holes through the bolt. No
glue is required and two locking surfaces make the lock even
more secure. These fasteners can withstand high and low
temperature cycling (-450° to 500°F) through at least 15
removals.
Brake pad attachment, 
As part of their online catalog, this company offers Solid
Gold CAD support system that allows users to view and
manipulate over 9000 stock springs, and download both 2D and
3D CAD models for use in their designs. Non-CAD users may save
viewed images in jpeg or tif format. A print or CD-ROM version
of the catalog are also available.
Quarter-turn fastener, 
This company produces a broad range of heat transfer devices
for sealed enclosures, incorporating air-to-air heat pipe
technology. Besides cooling and recirculating the clean air
within a cabinet, it also maintains the enclosure’s seal
against contaminants. The Freon-free devices have a low power
draw, are corrosion resistant, and are offered in oil-cooling
and explosion-proof models.