In-line torque
transducers. Non-contact differential transformer measuring
technology avoids rotation of electronic components during
operation. Four models have an integrated electronic module
providing 0 to ±10 VDC torque output. Magtrol
Inc, Buffalo, NY. Free info--Circle 741. http://www.OneRS.net/104df-741
Edge-belt conveyors.
Designed for automation equipment, Quick Edge conveyors
transport both large and miniature PCBs, BGA flex arrays,
MCMs and ceramic substrates within electronic assembly equipment.
Quickdraw Conveyor Systems, Burnsville, MN.
Free info--Circle 740. http://www.OneRS.net/104df-740
Planetary gearhead.
When compared to fixed planet configurations, low-cost,
quietly-running Equalizer gearheads provide up to 11% efficiency
increase and 20% decrease in torque ripple. The planet gears
dynamically adjust their radial position between the mating
sun gear and internal gears through a pivoting link. The loads
are evenly distributed through all three smoothly meshing
planet gears. Thomson Industries Inc, Port Washington,
NY. Free info--Circle 742. http://www.OneRS.net/104df-742
Hollow-shaft
servo actuator. Incorporating high-precision harmonic
drive gearing, a brushless DC servomotor and an optical encoder,
the FHA-C actuator delivers 30 arc-second accuracy, high stiffness
and short axial length. HD Systems Inc, Hauppauge,
NY. Free info--Circle 743. http://www.OneRS.net/104df-743
Servo amplifiers.
One and two axis E-VF series servo amplifiers interface
with standard motion control products, allowing the company's
linear motors to be integrated into multi-axis systems without
an external linear position encoder. LinMot,
Rogers, MN. Free info--Circle 744. http://www.OneRS.net/104df-744
Helical lead
screws. PowerAc Speedy Metric High-Helix lead screws provide
fast-moving travel rates and high load rates at low rotational
speeds. The standard lead accuracy for these screws is ±0.21mm/300mm
and custom accuracy up to ±0.1mm/300mm. They can replace
hydraulic and pneumatic cylinders or provide a low-cost alternative
for drive belts in applications requiring short stroke movement.
Nook Industries Inc, Cleveland, OH. Free
info--Circle 748. http://www.OneRS.net/104df-748
Custom-bore
couplers. Designed for applications with non-standard
circular, square, hexagonal and rectangular shafts, Multibeam
couplers with custom bores are constructed from a variety
of materials, including stainless steel. The couplers can
take care of the inevitable misalignment between shafts of
connected equipment where couplers must adapt to differing
configurations. Huco Engineering Industries Ltd, San
Raphael, CA. Free info--Circle 745. http://www.OneRS.net/104df-745
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
In-line torque
transducers. Non-contact differential transformer measuring
technology avoids rotation of electronic components during
operation. Four models have an integrated electronic module
providing 0 to ±10 VDC torque output. Magtrol
Inc, Buffalo, NY. Free info--Circle 741. 
Edge-belt conveyors.
Designed for automation equipment, Quick Edge conveyors
transport both large and miniature PCBs, BGA flex arrays,
MCMs and ceramic substrates within electronic assembly equipment.
Quickdraw Conveyor Systems, Burnsville, MN.
Free info--Circle 740. 
Planetary gearhead.
When compared to fixed planet configurations, low-cost,
quietly-running Equalizer gearheads provide up to 11% efficiency
increase and 20% decrease in torque ripple. The planet gears
dynamically adjust their radial position between the mating
sun gear and internal gears through a pivoting link. The loads
are evenly distributed through all three smoothly meshing
planet gears. Thomson Industries Inc, Port Washington,
NY. Free info--Circle 742. 
Hollow-shaft
servo actuator. Incorporating high-precision harmonic
drive gearing, a brushless DC servomotor and an optical encoder,
the FHA-C actuator delivers 30 arc-second accuracy, high stiffness
and short axial length. HD Systems Inc, Hauppauge,
NY. Free info--Circle 743. 
Servo amplifiers.
One and two axis E-VF series servo amplifiers interface
with standard motion control products, allowing the company's
linear motors to be integrated into multi-axis systems without
an external linear position encoder. LinMot,
Rogers, MN. Free info--Circle 744. 
Helical lead
screws. PowerAc Speedy Metric High-Helix lead screws provide
fast-moving travel rates and high load rates at low rotational
speeds. The standard lead accuracy for these screws is ±0.21mm/300mm
and custom accuracy up to ±0.1mm/300mm. They can replace
hydraulic and pneumatic cylinders or provide a low-cost alternative
for drive belts in applications requiring short stroke movement.
Nook Industries Inc, Cleveland, OH. Free
info--Circle 748. 
Custom-bore
couplers. Designed for applications with non-standard
circular, square, hexagonal and rectangular shafts, Multibeam
couplers with custom bores are constructed from a variety
of materials, including stainless steel. The couplers can
take care of the inevitable misalignment between shafts of
connected equipment where couplers must adapt to differing
configurations. Huco Engineering Industries Ltd, San
Raphael, CA. Free info--Circle 745.