PMT power supply. Series C power supplies for photomultipliers can provide an output voltage of –500 to –1250 VDC, from an input voltage of 12 to 15 VDC. Output is controlled by programming either 0 to 5 kW resistance or 0 to 4.5V voltage.
HiTek Power, Santee, CA. www.rsleads.com/204df-305
EMC gasket. A series of watersealing EMC gaskets shields electronics enclosures and cabinets against high-frequency RFI/EMI. With these gaskets, two separate seals are no longer required. Self-adhesion is available.
Holland Shielding Systems BV, Dordrecht, Netherlands.
www.rsleads.com/204df-306
Fiber-optic lightguides. This line of flexible quartz fiber-optic light-guides is configured in single- and multi-legged assemblies, customizable in lengths, fiber count and diameters. The light-guides use tighter packing fractions and a
particular randomizing method to provide more consistent light intensity from leg to leg than that of comparable light-guides. Certified light output is maintained within ±5%.
CT Fiberoptics Inc, Somers, CT. www.rsleads.com/203df-307
Cold plate drilling. This company offers hole tapping and drilling to customize its CP-10 series PressLock cold plates. Mechanical, rather than adhesive, position locking creates an efficient tubing-to-plate heat transfer interface bond.
Lytron Inc, Woburn, MA. www.rsleads.com/204df-308
Lightpipe. Designed specifically for use with small form-factor fiber-optic transceiver modules, these light pipes are made of water-clear UL94V-0-compliant polycarbonate material that permits high transmissivity of all colors and ESD protection.
Dialight Corp, Farmingdale, NJ. www.rsleads.com/204df-309
BONUS PRODUCT NEWS
exclusive to designfax.net
Fiber-optic adhesives. Designed to provide users with “cure-on-demand” fixing, ten adhesives with refractive indices from 1.42 to 1.58 are suitable for use in the optical pathway. Curing occurs only upon exposure to longwave UV or
visible light. Therefore, alignment can be adjusted after adhesive is dispensed. Curing in seconds facilitates JIT
manufacturing, thereby reducing costs. Compatible curing systems are available.
Dymax Corp, Torrington, CT. www.rsleads.com/204df-310
Ultraviolet LED. Featuring typical intensities above 500 mcds (700 mcds max.), these high-powered UV LEDs have a typical stable wavelength of 400nm. Applications include sterilization, low-spectrum analyzers, and counterfeit bill
detection. Bivar Inc, Irvine, CA. www.rsleads.com/204df-311
Locknuts.
A complete line of ESNA aerospace locknuts with non-metallic inserts is available in a wide range of
configurations. Red nylon insert material is used for applications up to 250°F, whereas Vespel may be used up to 500°F.
SPS Technologies, Jenkintown, PA. www.rsleads.com/204df-312
Conveyor rollers. Four new styles of Load Runner rollers include Urethane, for wear resistance and weatherability; Polymer, for quiet running, shock absorption and a protected bearing design that excludes contamination; Stainless Steel, capable of withstanding chemical exposure in harsh environments; and High Temp, which are permanently lubricated with high temperature grease and include high temperature seals. Osborn
International, Cleveland, OH. www.rsleads.com/204df-313
Would You Like A Reprint of
An Article? CLICK HERE!
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
PMT power supply. Series C power supplies for photomultipliers can provide an output voltage of –500 to –1250 VDC, from an input voltage of 12 to 15 VDC. Output is controlled by programming either 0 to 5 kW resistance or 0 to 4.5V voltage.
HiTek Power, Santee, CA. 
EMC gasket. A series of watersealing EMC gaskets shields electronics enclosures and cabinets against high-frequency RFI/EMI. With these gaskets, two separate seals are no longer required. Self-adhesion is available.
Holland Shielding Systems BV, Dordrecht, Netherlands.
Fiber-optic lightguides. This line of flexible quartz fiber-optic light-guides is configured in single- and multi-legged assemblies, customizable in lengths, fiber count and diameters. The light-guides use tighter packing fractions and a
particular randomizing method to provide more consistent light intensity from leg to leg than that of comparable light-guides. Certified light output is maintained within ±5%.
CT Fiberoptics Inc, Somers, CT. 
Cold plate drilling. This company offers hole tapping and drilling to customize its CP-10 series PressLock cold plates. Mechanical, rather than adhesive, position locking creates an efficient tubing-to-plate heat transfer interface bond.
Lytron Inc, Woburn, MA. 
Lightpipe. Designed specifically for use with small form-factor fiber-optic transceiver modules, these light pipes are made of water-clear UL94V-0-compliant polycarbonate material that permits high transmissivity of all colors and ESD protection.
Dialight Corp, Farmingdale, NJ. 
Fiber-optic adhesives. Designed to provide users with “cure-on-demand” fixing, ten adhesives with refractive indices from 1.42 to 1.58 are suitable for use in the optical pathway. Curing occurs only upon exposure to longwave UV or
visible light. Therefore, alignment can be adjusted after adhesive is dispensed. Curing in seconds facilitates JIT
manufacturing, thereby reducing costs. Compatible curing systems are available.
Dymax Corp, Torrington, CT. 
Ultraviolet LED. Featuring typical intensities above 500 mcds (700 mcds max.), these high-powered UV LEDs have a typical stable wavelength of 400nm. Applications include sterilization, low-spectrum analyzers, and counterfeit bill
detection. Bivar Inc, Irvine, CA. 
Locknuts.
A complete line of ESNA aerospace locknuts with non-metallic inserts is available in a wide range of
configurations. Red nylon insert material is used for applications up to 250°F, whereas Vespel may be used up to 500°F.
SPS Technologies, Jenkintown, PA. 
Conveyor rollers. Four new styles of Load Runner rollers include Urethane, for wear resistance and weatherability; Polymer, for quiet running, shock absorption and a protected bearing design that excludes contamination; Stainless Steel, capable of withstanding chemical exposure in harsh environments; and High Temp, which are permanently lubricated with high temperature grease and include high temperature seals. Osborn
International, Cleveland, OH.