| [incl/99dfx.htm]
Fluid Power . . . FILTERS
& SEALS
http://www.ronningenpetter.com Free Info - Circle 615
Free Info - Circle 618
Free Info - Circle 616
Free Info - Circle 617
Free Info - Circle 620
Free Info - Circle 621
Free Info - Circle 619 [incl/99dfx.htm] |
Pressure filters. The AF series of tubular backwashing pressure
filters offers an economical alternative for fluid handling systems requiring
uninterrupted flow. Pressurized, unfiltered liquid flows from the common inlet header
through permanent, cleanable filter elements. Filtered liquid discharges to the common
outlet header. Unwanted solids are retained on the outside of the filter element to allow
easy backwash cleaning. Ronningen-Petter, Portage, MI.
Filters. Designed to replace the standard breather cap on
gearboxes, hydraulic reservoirs, storage and process tanks, Beach Breathers filter water
and particulate contamination. Disposable, steel and tank models are available. Disposable
units handle airflow rates from 3 to 20 cfm and filter to 3 micron absolute. Steel units
handle airflow rates up to 120 cfm and remove particles to 1 micron absolute. Tank
breathers handle flow rates as high as 900 cfm with 3 micron filtration. Beach
Filter Products Inc, Glen Rock, PA. 
High performance seals. These knitted mesh seals and gaskets
solve problems in applications subject to extreme temperature, corrosion and vibration.
Knitted wire is available in a range of metals, composites, alloys, and plastics. The
knitting process creates a strong yet stretchable matrix of uniform interlocking loops.
Materials can be combined and knit into single-piece tubes in a variety of sizes, and then
compressed to various degrees to create a range of sealing characteristics. Amistco
Separation Products Inc, Alvin, TX. 
Coalescing filter. The DuraDRY brand of filters is suited for
high volume applications on OEM equipment or for outfitting a new building with main line
and point of use filtration. Filter housings are available in a wide range of sizes from
1/4- to 3-in. NPT inlet and outlet ports, and flow rates from a few scfm up to 6000 scfm.
Models are available with automatic drains and differential pressure indicators, depending
on specific requirements. Whatman Inc, Tewksbury, MA. 
Cure-in-place gasket. Eclipse 901 is a single component
UV-curable sealant designed to produce cure-in-place gaskets. It is a liquid that cures to
form a high-strength elastomer when exposed to UV-A light and can produce gaskets up to a
thickness of 150 mils. The uncured product is easy to handle at room temperature. It is
easily dispensed with automated equipment, cures in seconds with no post cure required,
and can fit virtually any part configuration. Elementis Specialties, Hightstown,
NJ. 
In-line filter. For working pressures of 580 and 1450 psi,
this company offers a line of industrial filters with nominal flows from 60 to 360 GPM.
The 40/100 FLE 0020 to 0120 filters are equipped with up to 3 in. SAE 4-bolt flange
connections in a cast iron head. Design of the housing flow passages is optimized for
lower pressure drops through the filter at high flow. With the 40 bar unit, no tools are
required to remove the cast aluminum filter bowl. EPE Industrial Filters, Barrington,
IL. 
Zero-maintenance filters. Constructed with permanent plastic
coalescing elements, these rugged filters remove any quantity of dirt, oil, and water --
even slugs of liquid -- from compressed air. The filter element, made from several hundred
grooved plastic discs stacked on a plastic core, efficiently collects suspended droplets
of water and oil, and coalesces the drops into a liquid film that drains continuously from
the element. Keller Products Inc, Lexington, MA.