| [incl/99dfx.htm]
Fluid Power . . . TUBING, HOSES & CONNECTORS (continued)
Free Info - Circle 537
Free Info - Circle 538
Free Info - Circle 539
Free Info - Circle 540
Free Info - Circle 541
Free Info - Circle 588
Free Info - Circle 589 [incl/99dfx.htm] |
Abrasion-resistant hoses.This company offers numerous styles of
abrasion-resistant hydraulic hoses under various product lines, including: Ironclad, which
features an ultra-high molecular weight polyethylene cover; Abrasion King, which is
designed for use with medium- to high-pressure hydraulic equipment operating in abrasive
environments; and E-Z Flex, which is known for its flexibility and also includes
Neoprene-cover hoses that provide high abrasion resistance. Dayco Industrial
Division, Dayton, OH. 
Compression fittings.Compress-Align compression fittings
combine the economy of a standard compression fitting with the reliability of a far more
expensive fitting. The fittings are pre-assembled and require no flaring, soldering or
other tubing preparation, even with out-of-round tubing. They can be installed more
quickly than either flared or standard tapered sleeve compression fittings, and are
interchangeable with standard compression fitting bodies. Parker Hannifin Corp, Brass
Products Division, Ostego, MI.
Flexible all-vinyl hose. Hi-Tech BVH Hose stays round, resists
salt, water, acid fumes and corrosion, and meets Federal motor vehicle standards. It
features a flexible vinyl wall with a rigid PVC helical reinforcement, rather than wire,
that rebounds after being crushed. Designed for use in automotive, RV and marine
applications including heater and defroster-, LAV- and bilge vent hose, it comes in 1- to
6-in. ID sizes. Hi-Tech Hose, Inc, Newburyport, MA.
Modular manifolds. Smartflow modular manifolds facilitate economical
metering and routing of multiple flow streams. Modular design provides flexibility of
application and maintenance. Manifolds are rated up to 240°F and 150 psig.
Fiberglass-reinforced nylon manifold material is naturally corrosion-resistance. Standard
inlet sizes are 3/4 in. and 1 in. NPT(M). Brass port fittings are available with hose barb
or quick-connect plug sizes 1/4-, 3/8- and 1/2-in. Each port has a built-in valve for easy
shut-off. Burger Engineering, Olathe, KS. 
Barbed connectors. These premium grade Kynar barbed connectors
are made of 100% virgin material that can be lot-traced back to the material manufacturer.
Connectors are available for tubing with an inner diameter of 1/16-, 3/32-, 1/8-, 3/16-,
and 1/4-in. Different combinations enable easy connections made from dissimilar-sized
flexible tubing. Barbs are molded without a parting line, and feature a sharp barb trail
end that is 1.4 to 1.5 times larger than the tubing ID. Ark-Plas Products, Inc,
Flippin, AR. 
Quick disconnect couplings. ChemQuik CQH series quick
disconnect couplings contain a completely nonmetallic flow path. They are designed for
instant connections during fluid transfer in specialty chemical, semiconductor and related
industries dealing with critical fluids from aggressive chemicals to ultra-pure water.
They tolerate operating pressure from 0 to 80 psi (depending on temperature), temperature
from 32° to 150°F ambient, and 32° to 225°F fluid. Colder Products Co,
Roseville, MN. 
Corrosion-resistant bars and tubes.CHROMEROD 75 chrome-plated
shafting offers a minimum yield strength of 75,000 psi and tensile strength of 100,000
min. psi. It is part of a complete series of CHROMEROD products. Used by manufacturers
that produce piston rods, pins, guide posts and similar components throughout the fluid
power industry, CHROMEROD 75 provides excellent machining characteristics and a superior
surface finish. Enduro Industries, Inc, Hannibal, MO.