Brushless pancake motor. The EC series of brushless pancake motors is electronically commutated for longer motor life. Motors are offered with Hall effect sensors as an option. Continuous output power is 30W.
Maxon Precision Motors Inc, Burlingame, CA. www.rsleads.com/206df-215
Highspeed DC brushless. The 0000308 low cogging brushless DC kit motor is designed for applications that are sensitive to torque ripple. The compact motor measures 3.6- by 1.35-in. and produces peak torque of 200 oz-in.
Servo Magnetics Inc, Canoga Park, CA. www.rsleads.com/206df-216
Wrap spring clutch/brakes. For dependable load starting and stopping applications, wrap spring products offer simple construction, low cost and long, maintenance-free life. The Standard CB series of clutches/ brakes is suited for high speeds, whereas the Super CB series is built for higher torques at lower speeds. Both start and stop loads within ½-degree per revolution. The compact WSC series of mechanically-actuated clutches provide high torque.
Warner Electric, S Beliot, IL. www.rsleads.com/206df-217
Torque limiter. The backlash-free series 320 torque limiter clutch protects equipment from overload damage. Its compact design reduces weight and inertia on the equipment. Various styles accommodate specific application requirements.
Autogard Corp, Rockford, IL. www.rsleads.com/206df-218
Linear actuators. Size 17 hybrid linear actuators have a class F insulation system that can endure temperatures up to 155°C. These high-temp actuators are available in captive, non-captive, external linear and linear rotary design.
Haydon Switch & Instrument Inc, Waterbury, CT. www.rsleads.com/206df-219
Hermetically sealed LVDTs. Built for linear motion control, machine tools, factory automation and general position measurement applications, the HSDR 750 series of hermetically sealed DC-operated LVDTs are ¾ in. in dia. with a radially mounted electrical connector that permits through-bore operation. They are accessible from both ends, permitting better mechanical support and core guidance than blind-bore units.
Macro Sensors, Pennsauken, NJ. www.rsleads.com/206df-220
4-axis motion control. For controlling stepper motors or servomotors, the PPCI7443 4-axis motion control card incorporates a PCL6045 control chip into its compact 32-bit PCI–bus plug-and-play design.
Nippon Pulse Motor Co Ltd, Radford, VA. www.rsleads.com/206df-221
High-resolution DC motors. By combining standard resonant mode for long travel and high speed with a non-resonant mode for ultra-fine positioning, these DC motors are capable of yielding discrete moves of 1 to 300 nm.
Nanomotion Inc, Ronkonkoma, NY. www.rsleads.com/206df-222
Step motors. Compared to conventional hybrid steppers, the PM line of geared steppers has a space-saving design that provides added torque for less cost. Sizes range from 35 to 56mm dia. and 17.3 to 40.6mm length. Gearheads add only 9.3mm to the overall length of the motor. Driven by standard stepper controllers, the motors can operate in either unipolar or bipolar mode with standard 5 or 12 VDC voltages.
EADmotors, Dover, NH. www.rsleads.com/206df-223
Speed reducers. The HHB series crossed helical gear design and HWB worm-and-wheel gear design speed reducers offer small size and high torque. Reduction ratios range from 1:1 to 60:1 and torque outputs range up to 77 lb-in.
PIC Design, Middlebury, CT. www.rsleads.com/206df-224
Cover strips. Stainless steel cover strips for miniature ball rail systems are pre-cut to rail length. They cover the mounting holes in the profiled rail, eliminating the expense of inserting plastic mounting hole plugs to protect against dirt.
Bosch Rexroth Corp, Hoffman Estates, IL. www.rsleads.com/206df-225
Technical guide. For understanding options available to establish accurate positioning for rotary and linear motion applications, Integrated Feedback Solutions explains theory and terminology as well as detailing steps for product specification, engineering calculations and product installation. Individual product sections include encoders, resolvers, rotary programmable limit switches, manual pulse generators and accessories.
Thomson Industries Inc, Port Washington, NY. www.rsleads.com/206df-226
Pillow- and flange-blocks. Self-lubricating Graphalloy pillow block and flange block assemblies offer install-and-forget capabilities suited to handle temperatures over 1000°F and a wide range of harsh environments.
Graphite Metallizing Corp, Yonkers, NY. www.rsleads.com/206df-227
Position feedback cylinder. The PFLF position feedback tie-rod cylinder combines a standard company TA series cylinder with a linear resistive transducer to provide continuous position sensing. A PCS pneumatic control system is available for the PFLF.
TRD Mfg, Monee, IL. www.rsleads.com/206df-228
Large rigid couplings. Offered with bore sizes between 2-and 6-in. ID, these rigid clamp-type couplings feature two-piece steel construction with a black oxide finish, and can be with or without a keyway. Capable of mating different sizes of shafts, the couplings can be supplied in both straight-through and stepped versions. They are suitable for heavy-duty applications on such large in-line shafts as mills and heavy construction equipment.
Stafford Mfg Corp, Woburn, MA. www.rsleads.com/206df-229
Would You Like A Reprint of
An Article? CLICK HERE!
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
Brushless pancake motor. The EC series of brushless pancake motors is electronically commutated for longer motor life. Motors are offered with Hall effect sensors as an option. Continuous output power is 30W.
Maxon Precision Motors Inc, Burlingame, CA. 
Highspeed DC brushless. The 0000308 low cogging brushless DC kit motor is designed for applications that are sensitive to torque ripple. The compact motor measures 3.6- by 1.35-in. and produces peak torque of 200 oz-in.
Servo Magnetics Inc, Canoga Park, CA. 
Wrap spring clutch/brakes. For dependable load starting and stopping applications, wrap spring products offer simple construction, low cost and long, maintenance-free life. The Standard CB series of clutches/ brakes is suited for high speeds, whereas the Super CB series is built for higher torques at lower speeds. Both start and stop loads within 
½-degree per revolution. The compact WSC series of mechanically-actuated clutches provide high torque.
Warner Electric, S Beliot, IL. 
Torque limiter. The backlash-free series 320 torque limiter clutch protects equipment from overload damage. Its compact design reduces weight and inertia on the equipment. Various styles accommodate specific application requirements.
Autogard Corp, Rockford, IL. 
Linear actuators. Size 17 hybrid linear actuators have a class F insulation system that can endure temperatures up to 155°C. These high-temp actuators are available in captive, non-captive, external linear and linear rotary design.
Haydon Switch & Instrument Inc, Waterbury, CT. 
Hermetically sealed LVDTs. Built for linear motion control, machine tools, factory automation and general position measurement applications, the HSDR 750 series of hermetically sealed DC-operated LVDTs are ¾ in. in dia. with a radially mounted electrical connector that permits through-bore operation. They are accessible from both ends, permitting better mechanical support and core guidance than blind-bore units.
Macro Sensors, Pennsauken, NJ. 
4-axis motion control. For controlling stepper motors or servomotors, the PPCI7443 4-axis motion control card incorporates a PCL6045 control chip into its compact 32-bit PCI–bus plug-and-play design.
Nippon Pulse Motor Co Ltd, Radford, VA. 
High-resolution DC motors. By combining standard resonant mode for long travel and high speed with a non-resonant mode for ultra-fine positioning, these DC motors are capable of yielding discrete moves of 1 to 300 nm.
Nanomotion Inc, Ronkonkoma, NY. 
Step motors. Compared to conventional hybrid steppers, the PM line of geared steppers has a space-saving design that provides added torque for less cost. Sizes range from 35 to 56mm dia. and 17.3 to 40.6mm length. Gearheads add only 9.3mm to the overall length of the motor. Driven by standard stepper controllers, the motors can operate in either unipolar or bipolar mode with standard 5 or 12 VDC voltages.
EADmotors, Dover, NH. 
Speed reducers. The HHB series crossed helical gear design and HWB worm-and-wheel gear design speed reducers offer small size and high torque. Reduction ratios range from 1:1 to 60:1 and torque outputs range up to 77 lb-in.
PIC Design, Middlebury, CT. 
Cover strips. Stainless steel cover strips for miniature ball rail systems are pre-cut to rail length. They cover the mounting holes in the profiled rail, eliminating the expense of inserting plastic mounting hole plugs to protect against dirt.
Bosch Rexroth Corp, Hoffman Estates, IL. 
Technical guide. For understanding options available to establish accurate positioning for rotary and linear motion applications, Integrated Feedback Solutions explains theory and terminology as well as detailing steps for product specification, engineering calculations and product installation. Individual product sections include encoders, resolvers, rotary programmable limit switches, manual pulse generators and accessories.
Thomson Industries Inc, Port Washington, NY. 
Pillow- and flange-blocks. Self-lubricating Graphalloy pillow block and flange block assemblies offer install-and-forget capabilities suited to handle temperatures over 1000°F and a wide range of harsh environments.
Graphite Metallizing Corp, Yonkers, NY. 
Position feedback cylinder. The PFLF position feedback tie-rod cylinder combines a standard company TA series cylinder with a linear resistive transducer to provide continuous position sensing. A PCS pneumatic control system is available for the PFLF.
TRD Mfg, Monee, IL. 
Large rigid couplings. Offered with bore sizes between 2-and 6-in. ID, these rigid clamp-type couplings feature two-piece steel construction with a black oxide finish, and can be with or without a keyway. Capable of mating different sizes of shafts, the couplings can be supplied in both straight-through and stepped versions. They are suitable for heavy-duty applications on such large in-line shafts as mills and heavy construction equipment.
Stafford Mfg Corp, Woburn, MA.