Synchronous controller. The MS332 is used with AC and DC
variable speed drives in advanced motor control systems. It simplifies system set-up,
monitors performance trends and makes on-the-fly speed adjustments for maximum
performance. During set-up, the unit's Auto-Teach function automatically calculates the
exact speed ratio between lead and follower systems. Drive Control Systems,
6111 Blue Circle Dr, Minneapolis, MN 55343. 612-930-0196. http://www.drivecontrolsystems.comCircle 641.
Process controller. The F4 series of 1/4 DIN temperature and process
controllers has four digital inputs that can be used to remotely modify the operation of
the controller or enable the display of pre-defined operator messages. Serial
communication and dual-alarm relays are included. The F4 series is NEMA 4X rated to
withstand harsh environments. Installation is simplified with touch-safe removable
connectors. Watlow, 12001 Lackland Rd, St Louis, MO 63146. 314-878-4600.
Side load actuator. The Strongarm ball screw actuator supports
substantial side, torque and offset loads, as well as axial loads. Three frame sizes are
available, each with 4,000 lbs. side load capacity. Strongarm combines the functions of
axial thrust and side load support within the envelope of the actuator. The actuator
isolates the side loads from the ballnut using an internally adjustable, pre-loaded
non-linear cam system. E-Drive Design, 124 Hebron Ave, Glastonbury, CT
06033. 800-878-1157. http://www.edrivedesign.com
Circle 654.
Rotary encoder. The Series 288 performs the functions of
several variable resistor/switch products. It is a 16mm encoder available with 16 detents;
2 bit binary, 4 bit gray and 4 bit hexadecimal codes; multiple terminal styles; choice of
shaft lengths and trim; and optional momentary switch. The encoder has a power rating of
100 mW at a maximum operating voltage of 50VAC. CTS Corp, 1601 Mishawaka St,
Elkhart, IN 46514. 888-287-4690. http://www.ctscorp.com Circle 640.
Terminal box motors. These AC induction motors with terminal
box allow the power cable to be fixed with the cable clamp and seal connector to provide
greater security for a variety of uses. No terminal crimping is needed as the lead wires
are directly inserted into the terminal block. This series includes induction and
reversible motor types with 25W, 40W, 60W and 90W of output power. Oriental Motor
USA, 2510 W 237th St, Suite 102, Torrance, CA 90505. 800-406-7484. http://www.orientalmotor.com Circle 645.
Mini controller. Measuring 4.9 in. x 3.5 in. x 1.8 in. (125mm
x 90mm x 45mm) including connectors, the CE marked, MC202 controller is DIN rail-mounted
and requires a single 24 VDC supply. The single-axis controller has four digital inputs
and four built-in I/Os which can be expanded using CANbus digital I/O and analog input
modules. The CAN link also allows peer-to-peer communication between controllers. Trio
Motion Technology, Unit 2, Empire Way, Gloucester, GL2 5HY, UK. 011441452-308332.
Synchronous controller. The MS332 is used with AC and DC
variable speed drives in advanced motor control systems. It simplifies system set-up,
monitors performance trends and makes on-the-fly speed adjustments for maximum
performance. During set-up, the unit's Auto-Teach function automatically calculates the
exact speed ratio between lead and follower systems. Drive Control Systems,
6111 Blue Circle Dr, Minneapolis, MN 55343. 612-930-0196. 
Process controller. The F4 series of 1/4 DIN temperature and process
controllers has four digital inputs that can be used to remotely modify the operation of
the controller or enable the display of pre-defined operator messages. Serial
communication and dual-alarm relays are included. The F4 series is NEMA 4X rated to
withstand harsh environments. Installation is simplified with touch-safe removable
connectors. Watlow, 12001 Lackland Rd, St Louis, MO 63146. 314-878-4600.
Side load actuator. The Strongarm ball screw actuator supports
substantial side, torque and offset loads, as well as axial loads. Three frame sizes are
available, each with 4,000 lbs. side load capacity. Strongarm combines the functions of
axial thrust and side load support within the envelope of the actuator. The actuator
isolates the side loads from the ballnut using an internally adjustable, pre-loaded
non-linear cam system. E-Drive Design, 124 Hebron Ave, Glastonbury, CT
06033. 800-878-1157. 
Rotary encoder. The Series 288 performs the functions of
several variable resistor/switch products. It is a 16mm encoder available with 16 detents;
2 bit binary, 4 bit gray and 4 bit hexadecimal codes; multiple terminal styles; choice of
shaft lengths and trim; and optional momentary switch. The encoder has a power rating of
100 mW at a maximum operating voltage of 50VAC. CTS Corp, 1601 Mishawaka St,
Elkhart, IN 46514. 888-287-4690. 
Terminal box motors. These AC induction motors with terminal
box allow the power cable to be fixed with the cable clamp and seal connector to provide
greater security for a variety of uses. No terminal crimping is needed as the lead wires
are directly inserted into the terminal block. This series includes induction and
reversible motor types with 25W, 40W, 60W and 90W of output power. Oriental Motor
USA, 2510 W 237th St, Suite 102, Torrance, CA 90505. 800-406-7484. 
Mini controller. Measuring 4.9 in. x 3.5 in. x 1.8 in. (125mm
x 90mm x 45mm) including connectors, the CE marked, MC202 controller is DIN rail-mounted
and requires a single 24 VDC supply. The single-axis controller has four digital inputs
and four built-in I/Os which can be expanded using CANbus digital I/O and analog input
modules. The CAN link also allows peer-to-peer communication between controllers. Trio
Motion Technology, Unit 2, Empire Way, Gloucester, GL2 5HY, UK. 011441452-308332.