Designed for high flow air, gas and liquid service, the series 1400 low-cost safety relief valve features the company’s replaceable O-ring design for seal tightness and maintenance ease. O-ring materials include fluorocarbon (Viton), nitrile (Buna-N), EPDM and Kalrez. This fixed blowdown valve is available in flanged and threaded configurations, and has set pressures from 5 to 2000 psig. It is capable of handling inlet temperatures from -60° to 550°F. Inlet sizes range from ½- to 2-in dia. and orifice areas of 0.059 to 0.830 in.². All valves are ASME UV code stamped for air/gas and liquids and are NBBI certified. Standard materials are carbon steel body and 316 stainless steel trim. Applications include gas compressors, separators, heater treaters, scrubbers, dehydrators, gas production units, transmission and gathering lines.
Hydroseal Valve Co Inc, N Kilgore, TX. www.rsleads.com/207df-230
Check valve. The CCPI series Press-In Chek miniature cartridge-style check valve is specifically designed for installation into plastics. It is offered in a range of cracking pressures from 0 to 72.5 psid and is compatible with most fluids.
The Lee Company, Westbrook, CT. www.rsleads.com/207df-231
Hydraulic cylinders. Available in capacities ranging from 380 to 8800 lbs, these specialty hydraulic cylinders can be used in a variety of manufacturing applications including clamping, positioning, punching and pressing.
Enerpac, Milwaukee, WI. www.rsleads.com/207df-232
Water inlet valves. Designed to complement the company’s existing line of low-pressure liquid dispensing valves, the DSVP40 series handles water pressures of 3 to 145 psi with internal flow regulation. Inlet connections consist of either an external ¾-in. hose thread or an internal 3/8 NPT brass fitting. Other features include straight or 90-degree bodies and AC (120 or 240V) or 24 VDC coils.
Deltrol Controls, Milwaukee, WI. www.rsleads.com/207df-233
BONUS VALVES & CYLINDERS exclusive to designfax.net
Automatic manifolds. Eliminating the need for operators to change switches or pressure upon cylinder depletion, VM series fully automatic manifolds provide an uninterrupted supply of gas as the primary bank of cylinders is depleted.
Victor Specialty Products, St Louis, MO. www.rsleads.com/207df-234
Solenoid valves. Designed to meet aerospace specifications, CSC solenoid valves are available in a variety of configurations with operating pressures from vacuum to 6000 psig. Various AC and DC voltages are offered with class H coils.
Circle Seal Controls Inc, Corona, CA. www.rsleads.com/207df-235
Gas spring. Black nitride coating offers corrosion resistance for the Nitrider gas spring, which is available in a variety of sizes, stroke lengths and P1 forces. The springs are completely sealed and have surpassed a 200-hr salt spray test. Rod diameters range from 6 to 10 mm and lengths are 5.5-in. compressed (7.5-in. extended) to 16.5-in. compressed (28-in. extended). Custom sizes are also available. P1 forces are 20 to 250 lbs.
Service Plus Distributors Inc, Bristol, PA. www.rsleads.com/207df-236
Rodless cylinders. The HORV series of rodless cylinders are shorter, thinner and lighter than conventional cylinders of equal bore and stroke. A flat piston creates a profile up to 40% thinner. Various mounting options are available.
Humphrey Products Co, Kalamazoo, MI. www.rsleads.com/207df-237
Ball valves. A line of trunnion-style, severe-duty ball valves and actuators is available for effective shut-off of liquid and gas flow up to 20,000 psi. Various configurations with orifices of 0.187- or 0.375-in. dia. are available.
High Pressure Equipment Co, Erie, PA. www.rsleads.com/207df-238
Butterfly valves. Suited for HVAC, process and industrial applications, where positive shutoff is required for liquids, gases or slurries, the 125WB/LB butterfly valve series is available in 2- to 48-in. sizes with wafer or lug body design. With a 200 psig pressure rating for sizes up to 12 in. and 150 psig ratings for larger sizes, the series is constructed with cast iron body and stainless steel shaft. They are manufactured for use with ANSI 125 or 150 class flanges.
Leslie Controls Inc, Tampa, FL. www.rsleads.com/207df-239
High-cycle ball valve. High-Cycle 7223D RotoBall bi-directional valve series includes a Delta stem seal designed for 50,000-100,000 cycles. Maximum operating pressure is 5000 psig at 70°F with temperature ranges from -65° to 400°F.
Hoke Inc, Spartanburg, SC. www.rsleads.com/207df-240
Position feedback cylinder. The PFLF position feedback tie-rod cylinder combines a standard company TA series cylinder with a linear resistive transducer to provide continuous position sensing. A PCS pneumatic control system is available for the PFLF.
TRD Mfg, Monee, IL. www.rsleads.com/207df-241
Valve software. SizeMaster Mark IV pressure relief valve engineering software (v.4.2) integrates standard engineering practice with sizing and selecting pressure relief valves. The Windows program calculates the orifice area required to relieve any process scenario or combination of scenarios under best-case and worst-case conditions. It features Omega 2-phase sizing (D.I.E.R.S.), noise and reaction force calculations and multiple valve sizing.
Farris Engineering, Brecksville, OH. www.rsleads.com/207df-242
Servocartridge valves. This line of high dynamic closed-loop cartridge valves features a poppet and sleeve design in sizes NG 40, 50, 63 and 80, and a spool and bushing design in sizes NG 30, 50 and 63. On- or off-board electronics are available.
Moog Inc, E Aurora, NY. www.rsleads.com/207df-243
Multiport ball valves. Manufactured in high-strength polypropylene, these ball valves feature Teflon seats and EPDM O-rings with Viton kits available on request. The valves are pressure rated at 125 psi at 70°F, and are available in ¾- and 2-in. sizes.
Bee Valve Inc, Elyria, OH. www.rsleads.com/207df-244
Sealless diaphragm valves. The C62 series of industrial diaphragm-style pressure regulation valves features a sealless, flow-through design suited for high-pressure, dirty fluid applications. The diaphragm design eliminates the need for valve plunger seals, which are typically troublesome in regulating valves. The flow-through design reduces wear on internal parts, resulting in longer valve life.
Hydra-Cell Industrial Pumps, Minneapolis, MN. www.rsleads.com/207df-245
Hi-temp valves. The V2 valve is designed to handle extreme operating conditions found in difficult thermal processing operations up to 775°F. It can operate in vacuums and up to 7500 psi. A bellows seal allows leak-free stem valve motion.
springer co-ax inc, Penndel, PA. www.rsleads.com/207df-246
Hydraulic check valves. Slip-In type ICS check valves and ICT check valves with SAE threads have a normal size ranging from 02 to 48 with cracking pressures from 3 to 90 psi. Hardened, lapped discs and seats provide positive fluid shutoff.
Inserta Products Inc, Blue Bell, PA. www.rsleads.com/207df-247
Selection guide. This company’s Automated Ball Valve Selection Guide contains information on 40, 60 and 83 series ball valves and ISO 5211-compliant mounting brackets with actuators, limit switches/sensors, and solenoids produced by other manufacturers. Users can determine the operating torque of ball valves under various operating conditions, select actuators based on operating torque and choose appropriate mounting brackets.
Swagelok Co, Solon, OH. www.rsleads.com/207df-248
Multiport check valves. Designed to simplify plumbing, these multi-port check valves permit unidirectional flow control in any orientation. They are manufactured with nylon bodies and fluorosilicone seals.
Industrial Specialties Mfg Inc, Englewood, CO. www.rsleads.com/207df-249
Cryogenic valves. Designed to handle critical flow control for liquid N&sub2; and CO&sub2;, the SV91 series of cryogenic valves are suitable for temperatures as low as -452°F. Standard models are offered in 3/64- to 3/8-in. orifices.
Valcor Engineering Corp, Springfield, NJ. www.rsleads.com/207df-250
Heated valve brochure. Describing the HPS line of Jalapeno heated vacuum valves, this brochure includes applications, technical overview, specifications, dimensions, part numbers and pricing. The poppet-style vacuum valves will reach a minimum internal temperature of 150°C. The valves are designed to be used in manufacturing processes, such as low-pressure chemical vapor deposition in semiconductor fabrication to vaporize production byproducts.
MKS Instruments Inc, Boulder, CO. www.rsleads.com/207df-251
Control valve brochure. This brochure describes control pinch valves in sizes 1- to 72-in., each with a full-port opening, bi-directional seal, abrasion resistant rubber sleeve, no crevices or dead spots, and no packing or seats. Various synthetic elastomers are compatible with almost any material, and wear-sensing “smart” sleeves are available. Single acting and centerline-closure designs are available with hydraulic, pneumatic or electrical actuation.
Red Valve Co Inc, Carnegie, PA. www.rsleads.com/207df-252
Would You Like A Reprint of
An Article? CLICK HERE!
Designfax
- Online
2500 Tamiami Trail
N., Nokomis, FL 34275
Phone: 941-966-9521 Fax: 941-966-2590
To request a media kit or back issues click here.
(US requests only)
Please report problems with this site to the Designfax - Online
site manager.
Top Product
Check valve. The CCPI series Press-In Chek miniature cartridge-style check valve is specifically designed for installation into plastics. It is offered in a range of cracking pressures from 0 to 72.5 psid and is compatible with most fluids.
The Lee Company, Westbrook, CT. 
Hydraulic cylinders. Available in capacities ranging from 380 to 8800 lbs, these specialty hydraulic cylinders can be used in a variety of manufacturing applications including clamping, positioning, punching and pressing.
Enerpac, Milwaukee, WI. 
Water inlet valves. Designed to complement the company’s existing line of low-pressure liquid dispensing valves, the DSVP40 series handles water pressures of 3 to 145 psi with internal flow regulation. Inlet connections consist of either an external ¾-in. hose thread or an internal 3/8 NPT brass fitting. Other features include straight or 90-degree bodies and AC (120 or 240V) or 24 VDC coils.
Deltrol Controls, Milwaukee, WI. 
Application Xtra
Automatic manifolds. Eliminating the need for operators to change switches or pressure upon cylinder depletion, VM series fully automatic manifolds provide an uninterrupted supply of gas as the primary bank of cylinders is depleted.
Victor Specialty Products, St Louis, MO. 
Solenoid valves. Designed to meet aerospace specifications, CSC solenoid valves are available in a variety of configurations with operating pressures from vacuum to 6000 psig. Various AC and DC voltages are offered with class H coils.
Circle Seal Controls Inc, Corona, CA. 
Gas spring. Black nitride coating offers corrosion resistance for the Nitrider gas spring, which is available in a variety of sizes, stroke lengths and P1 forces. The springs are completely sealed and have surpassed a 200-hr salt spray test. Rod diameters range from 6 to 10 mm and lengths are 5.5-in. compressed (7.5-in. extended) to 16.5-in. compressed (28-in. extended). Custom sizes are also available. P1 forces are 20 to 250 lbs.
Service Plus Distributors Inc, Bristol, PA. 
Rodless cylinders. The HORV series of rodless cylinders are shorter, thinner and lighter than conventional cylinders of equal bore and stroke. A flat piston creates a profile up to 40% thinner. Various mounting options are available.
Humphrey Products Co, Kalamazoo, MI. 
Ball valves. A line of trunnion-style, severe-duty ball valves and actuators is available for effective shut-off of liquid and gas flow up to 20,000 psi. Various configurations with orifices of 0.187- or 0.375-in. dia. are available.
High Pressure Equipment Co, Erie, PA. 
Butterfly valves. Suited for HVAC, process and industrial applications, where positive shutoff is required for liquids, gases or slurries, the 125WB/LB butterfly valve series is available in 2- to 48-in. sizes with wafer or lug body design. With a 200 psig pressure rating for sizes up to 12 in. and 150 psig ratings for larger sizes, the series is constructed with cast iron body and stainless steel shaft. They are manufactured for use with ANSI 125 or 150 class flanges.
Leslie Controls Inc, Tampa, FL. 
High-cycle ball valve. High-Cycle 7223D RotoBall bi-directional valve series includes a Delta stem seal designed for 50,000-100,000 cycles. Maximum operating pressure is 5000 psig at 70°F with temperature ranges from -65° to 400°F.
Hoke Inc, Spartanburg, SC. 
Position feedback cylinder. The PFLF position feedback tie-rod cylinder combines a standard company TA series cylinder with a linear resistive transducer to provide continuous position sensing. A PCS pneumatic control system is available for the PFLF.
TRD Mfg, Monee, IL. 
Valve software. SizeMaster Mark IV pressure relief valve engineering software (v.4.2) integrates standard engineering practice with sizing and selecting pressure relief valves. The Windows program calculates the orifice area required to relieve any process scenario or combination of scenarios under best-case and worst-case conditions. It features Omega 2-phase sizing (D.I.E.R.S.), noise and reaction force calculations and multiple valve sizing.
Farris Engineering, Brecksville, OH. 
Servocartridge valves. This line of high dynamic closed-loop cartridge valves features a poppet and sleeve design in sizes NG 40, 50, 63 and 80, and a spool and bushing design in sizes NG 30, 50 and 63. On- or off-board electronics are available.
Moog Inc, E Aurora, NY. 
Multiport ball valves. Manufactured in high-strength polypropylene, these ball valves feature Teflon seats and EPDM O-rings with Viton kits available on request. The valves are pressure rated at 125 psi at 70°F, and are available in ¾- and 2-in. sizes.
Bee Valve Inc, Elyria, OH. 
Sealless diaphragm valves. The C62 series of industrial diaphragm-style pressure regulation valves features a sealless, flow-through design suited for high-pressure, dirty fluid applications. The diaphragm design eliminates the need for valve plunger seals, which are typically troublesome in regulating valves. The flow-through design reduces wear on internal parts, resulting in longer valve life.
Hydra-Cell Industrial Pumps, Minneapolis, MN. 
Hi-temp valves. The V2 valve is designed to handle extreme operating conditions found in difficult thermal processing operations up to 775°F. It can operate in vacuums and up to 7500 psi. A bellows seal allows leak-free stem valve motion.
springer co-ax inc, Penndel, PA. 
Hydraulic check valves. Slip-In type ICS check valves and ICT check valves with SAE threads have a normal size ranging from 02 to 48 with cracking pressures from 3 to 90 psi. Hardened, lapped discs and seats provide positive fluid shutoff.
Inserta Products Inc, Blue Bell, PA. 
Selection guide. This company’s Automated Ball Valve Selection Guide contains information on 40, 60 and 83 series ball valves and ISO 5211-compliant mounting brackets with actuators, limit switches/sensors, and solenoids produced by other manufacturers. Users can determine the operating torque of ball valves under various operating conditions, select actuators based on operating torque and choose appropriate mounting brackets.
Swagelok Co, Solon, OH. 
Multiport check valves. Designed to simplify plumbing, these multi-port check valves permit unidirectional flow control in any orientation. They are manufactured with nylon bodies and fluorosilicone seals.
Industrial Specialties Mfg Inc, Englewood, CO. 
Cryogenic valves. Designed to handle critical flow control for liquid N&sub2; and CO&sub2;, the SV91 series of cryogenic valves are suitable for temperatures as low as -452°F. Standard models are offered in 3/64- to 3/8-in. orifices.
Valcor Engineering Corp, Springfield, NJ. 
Heated valve brochure. Describing the HPS line of Jalapeno heated vacuum valves, this brochure includes applications, technical overview, specifications, dimensions, part numbers and pricing. The poppet-style vacuum valves will reach a minimum internal temperature of 150°C. The valves are designed to be used in manufacturing processes, such as low-pressure chemical vapor deposition in semiconductor fabrication to vaporize production byproducts.
MKS Instruments Inc, Boulder, CO. 
Control valve brochure. This brochure describes control pinch valves in sizes 1- to 72-in., each with a full-port opening, bi-directional seal, abrasion resistant rubber sleeve, no crevices or dead spots, and no packing or seats. Various synthetic elastomers are compatible with almost any material, and wear-sensing “smart” sleeves are available. Single acting and centerline-closure designs are available with hydraulic, pneumatic or electrical actuation.
Red Valve Co Inc, Carnegie, PA.