[dfx/incl/99dfx.htm]
Fluid Power . . . PNEUMATIC COMPONENTS
Top Product
* Extremely high life cycles
* "Snap together" customization
Pneumatic valve manifolds.
Type 8640 modular manifold pneumatic control systems are built to exactly meet
customers' and system integrators' requirements for size, flow, and performance. These 10,
18, and 32mm-size valve systems feature a "snap together" design for easy
customization with electrical and pneumatic interfaces. They also feature manual override
and speed control. The wide selection of valves provides the ability to configure a
manifold system for nearly all applications. All valves feature a diaphragm-seat design
and are controlled by a unique rocker-design pilot valve. This technology offers extremely
high life cycles (>100 million). Valve performance is not affected when used with
non-lubricated, dry air. Burkert-USA, Irvine, CA.
http://www.1rs.com/009df-612
Free Info - Circle 612
 Air regulators. Expanding its MAR-1 pressure
regulator line, which had been offered only in a 0-100 psi range, the new series will
provide ranges of 0-10, 0-20, 0-30, 0-40, 0-50, 0-60 and 0-70 psi to provide more precise
control of outlet pressure. Full range of the regulator requires 8 turns of the adjustment
knob on the screw adjust model. This converts to 12.5 psi per turn for the 0-100 psi model
and 1.25 psi per turn for the 0-10 psi model. Clippard Instrument Laboratory Inc, Cincinnati,
OH.
http://www.1rs.com/009df-613
Free Info - Circle 613
 Switches. These switches can perform flow
control, pressure, vacuum or differential switching in a variety of configurations. They
include a printed circuit board switch 1-in. diameter x 0.675-in. high (also available
with fast-on terminals); a "Tinytrol" pressure switch measuring 1.7- x 1.9- x
1-in. with a 1/8 NPT pressure port for mounting (other mounting available); a differential
switch 1.65 x 1.18-in. deep; and an all-plastic pressure switch. Pres:Air:Trol Corp,
Mamaroneck, NY. http://www.1rs.com/009df-614
Free Info - Circle 614
 Pneumatic cylinder. This single-acting cylinder
has an extremely low profile for use where mounting space must be held to a minimum. Air
pressure is used for piston extension, but vacuum is used for piston retraction. Vacuum
eliminates a spring and reduces overall height by at least one order of magnitude. A
vacuum source is required and four-way valve connections are opposite to common practice,
instead using a cylinder to connect to the port typically used for an inlet. Mack
Corp, Flagstaff, AZ.
http://www.1rs.com/009df-615
Free Info - Circle 615
[dfx/incl/99dfx.htm]
|