[dfx/incl/99dfx.htm]
Product news
Free Info - Circle 522
Free Info - Circle 641
Free Info - Circle 520
Free Info - Circle 523
Free Info - Circle 526
Free Info - Circle 524
Free Info - Circle 528
Free Info - Circle 530
Free Info - Circle 532
Free Info - Circle 525 (continue) [dfx/incl/99dfx.htm] |
Flexible sensor element. M-Series level transmitters are good
for precision level measurement of liquids in most vessels. This element allows easy
installation and removal of the sensor head and element from the sensor pipe for routine
maintenance and calibration in low overhead clearance areas. The sensor element can be
removed without breaking the seal, and the flexible design allows it to bend to as small
as 1.8-in diameter. MTS Systems Corp, Cary, NC. 
Flow meter measures low flows. The
emac series electromagnetic flow meter measures the flow of conductive fluids, including
aqueous solutions, corrosive fluids, slurries, pesticides, water-based pains and polymers,
without any moving parts. The sensor is constructed with a 303/316 stainless steel
housing, ceramic liner and platinum electrodes with a NEMA 4x rating. A plastic liner with
stainless steel electrodes is available for use with hydrogen peroxide. Norax Inc,
Hampshire, IL.
Fluid control solenoid. The STX 2436 solenoid is specially
designed for low-pressure fluid applications in high vibration environments. Incorporating
internal seals and a threaded adapter for direct connection to fluid manifolds, the
solenoid can operate as a relief valve up to 14.7 PSIG or as a check valve up to 44.1
PSIG. The solenoid measures 0.75-in. dia by 1-in. long with a 3/8-24 UNF-2A adapter
thread. Fluid seal and tip design modifications are available. Bicron Electronics Co,
Canaan, CT. 
Wire and ribbon products. Platinum-
and palla-dium clad wire and ribboncomposites eliminate the need for 100 percent metal in
many applications.The products feature precious metal on the outside to provide
characteristics such as weldability, conduc-tivity, thermal stability, and
biocompatibility. The products are available in wire sizes from 0.002-in to 0.375-in OD
and in ribbon widths up to 1-in with varying thicknesses, depending upon width. Anomet
Products Inc, Shrewsbury, MA. 
Protective cable sleeving. Firefast
insulates cordsets and sensors from damaging high-temperature materials. Constructed of
heat-treated, acryl-coated braided fiberglass, firefast provides protection from flames
and molten materials in welding and other applications. The sleeving offers simple and
cost-effective protection for cordsets and sensors in extreme condition industries,
including resins, coatings and metal fabricating. The sleeving slides on easily with a
friction fit. Turck Inc, Plymouth, MN. 
OEM controller. The pCO2 programmable OEM controller
features a modular, high-speed, 16-bit microprocessor with up to 6 MB of Flash RAM for
program and parameter storage. The controller has standard communications ports for
connection to building automation systems and modems, and also features local area network
ports that permit multiple controllers to share sensors and information. A real time clock
is built-in. DGH Systems, LLC, Lancaster, PA. 
High-capacity force transducers. Patented internal gaging
technology is used for the design and manufacture of high-capacity force transducers,
including clevis pins up to 10 in. in diameter with capacities to over a millon pounds,
flat load cells with capacities up to 2 million pounds, and high-capacity force sensing
bolts, studs, and tension links. The gaging provides high-accuracy measurements in
aerospace, marine, mining and many other industrial applications. StrainSert,
West Conshohocken, PA. 
Pitch switch adapters. A limited production series of
Correct-A-Chip adapters now makes the smallest 64-pin 0.5mm TQFP to 0.8mm QFP conversions
possible. The adapter has been introduced as a fine pitch extension of the Correct-A-Chip
adapter series that provides for a precise pin-for-pin connection. The pins are
manufactured of 301 full hard stainless steel, per UNS C36000 ASTM-b16085. Operating
temperature for the adapters ranges up to 221°F. Aries Electronics Inc,
Frenchtown, NJ. 
Screw terminals. Two additions to an assortment of PC-mount
screw terminals are a cost-effective alternative to PC screw-type edge connectors, barrier
blocks, terminal boards and strips. The low-profile, 15A, space-saving devices are suited
to high-density packaging that offers a stable no-rock design with exclusive anti-rotation
feature. Manufactured of tin-plated 0.032 brass, this terminal is supplied with a
combination drive 6-32 x 1/4-in. nickel plated binding head machine screw. Keystone
Electronics Corp, Astoria, NY. 
Surface mount LEDs. Featuring a
combination of a built-in domed lens on top of a flat-bottomed carrier, SMT LEDs focus
light to a narrow 50-deg angle of emission. These LEDs are good for display or
backlighting applications, as well as for status or circuit fault indicators, keyboard
post lighting, medical diagnostic circuits, or anywhere a focused light source, in a
surface mount package, is desired. Two sizes of the LEDs are available. Lumex Inc,
Palatine, IL.