March 06, 2012 Volume 08 Issue 09

Mechanical News & Products

Designfax weekly eMagazine

Subscribe Today!
image of Designfax newsletter

Buyers Guide

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

New lead screw configurator allows for quick design

igus has developed a new lead screw configurator that allows customers to design their own lead screw and associated drawing in minutes without in-depth technical knowledge and CAD software. The new tool even directly checks the plausibility of the configuration. Trapezoidal, high helix, or metric thread lead screws in combination with nuts made of iglide high-performance polymers ensure lubrication-free adjustment for long-lasting and smooth-running applications. The company runs its North American operations out of Providence, RI.
Learn more.


Compact spiral elevator opens up conveying possibilities

FlexLink AB has upgraded its compact spiral elevator even further with in and out feeds. With a total of six configurations, this solution increases your possibilities and fits different production line layouts even better. The spiral gives you increased access to the production floor, offering a 40 percent smaller footprint compared to the most common solutions on the market -- and the possibility to transport goods vertically, bridging the differences of height. The spiral can be installed in a few hours and ensures smooth running, low noise, and long service life.
Learn more.


Water park's 5D movies require special pneumatics

Can you imagine going to the movies in a bikini or swim trunks? You can really do it -- you don't have to dream it. A new form of movie experience at an Abu Dhabi water park involves the audience sitting in special moving seats with various integrated effects taking place around them and on them, including real floods that fill up the theater. Emerson's AVENTICS pneumatic components play a key role in making the magic happen.
Read the full article.


8 ways to improve your sheet metal parts

All sheet metal parts start out flat. And no matter how convoluted or complex their final shapes may be, the wall thickness of those parts must be uniform throughout. Engineers from Protolabs share their eight quick sheet metal design tips, focusing on material and finishing options along with design elements like bends, reliefs, holes, and slots when developing your metal components. Really useful info.
Read the full article.


Resins: Alkali stress crack resistance for automotive

The Polyplastics Group recently introduced a new polybutylene terephthalate (PBT) resin that delivers excellent alkali stress crack resistance for a range of automotive applications. DURANEX 532AR also exhibits outstanding hydrolysis, heat shock resistance, and electrical performance for components in the chassis and engine compartment. This material has successfully reduced the risk of cracking in molded articles by preventing alkali (often formed by rust on metal parts) from penetrating the inside of the resin, thus imparting toughness that helps generate less stress. Ideal for use in parts (like electrical components and sensors) installed in the chassis section and lower areas of vehicles.
Learn more.


New washdown servo gearboxes from Gam

Gam Gear's new SSP Series is an innovative washdown servo gearbox solution designed for food, medical, or sanitary applications. It is a precision inline planetary gearbox outwardly constructed of 300-series stainless steel. The motor adapter plate, housing, and shaft are all stainless steel. Viton seals, stainless steel hardware, and sealed interfaces provide outstanding corrosion resistance in all types of wet and caustic washdown environments. Ideal for any light or demanding servo application where corrosion resistance is a requirement, the SSP Series offers economy, high precision, and long-lasting performance.
Learn more.


Get a linear shafting sample on the house

Lee Linear has produced world-class, linear motion components and linear shafting for over 40 years. With the ability to manufacture custom shafting -- threading, diameter reduction, keyways, flats, plating, and more -- to required standards in a short amount of time, Lee Linear is able to fulfill orders on time, eliminating downtime and increasing profits for its customers.
Request your sample.


Top Product: Cross roller ring can swing the loads

Because it has orthogonally arranged cylindrical rollers, the cross roller ring from THK is a roller bearing with high rotation accuracy capable of bearing loads in every direction. Cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90-deg V groove, separated from each other by a spacer retainer. This design allows just one bearing to receive loads in all directions including radial, axial, and moment loads. This component is optimal for applications such as joints and swiveling units of industrial robots, swiveling tables of machining centers, rotary units of manipulators, precision rotary tables, medical equipment, measuring instruments, and IC manufacturing machines. Available in several rotation configurations including inner/outer ring, inner ring only, and outer ring only. And now a new micro cross roller ring is perfect to handle smaller applications.
Learn more about THK cross roller rings.
Learn about the new Micro Cross Roller Ring RAU.


Solvay develops sustainable Halar ECTFE anti-corrosion coating system

Solvay's new waterborne Halar ECTFE coating system broadens metal corrosion-prevention applications for the chemical processing industry. The coating system is comprised of a high-adhesion primer and topcoat and is easily applied using standard liquid spray equipment. Solvay's Halar ECTFE powder coatings have been used for corrosion prevention for over 40 years for equipment in a range of industries including acids, mining, pulp and paper, pharmaceutical, food and beverage, and semiconductor, among others. The new waterborne Halar ECTFE liquid coating tech expands the range of end-use applications to those that are difficult or impossible to powder coat. This includes complex shapes, uneven surfaces, oversized vessels, pipe interiors, and tanks and containers. Moreover, it provides engineers an alternative protective metal coating option to corrosion-resistant alloys (CRAs).
Learn more.


Powerhouse gripper for collaborative applications

The SCHUNK Co-act EGL-C long-stroke gripper is a milestone on the way to a comprehensive human/robot collaboration (HRC): It is the world's first long-stroke gripper developed for collaborative operation. It achieves high gripping forces up to 450 N (handling weights beyond small parts assembly) and combines them with a long stroke of 42.5 mm per finger. The intelligent 24-V unit is suitable for handling workpiece weights up to 2.25 kg and can be flexibly used in a wide range of applications. The SCHUNK developers are particularly focused on the automotive-related supply industry, carmakers, and machine building, where powerful grippers may be able to achieve rapid success in HRC applications.
Learn more.


Xometry receives ISO 9001:2015 and AS9100D certifications

Xometry, the world's largest digital manufacturing marketplace, recently announced that it has received ISO 9001:2015 and AS9100D certifications. These certifications are among the industry's most rigorous and reflect the company's commitment to quality. ISO 9001 is the world's most widely recognized quality management standard and helps organizations to meet the expectations and needs of their customers. The AS9100 standard goes beyond the requirements of ISO 9001 to meet the rigorous demands of the aerospace and defense industries.
Learn more.


Lightweight, heavy-duty thermoplastic planks introduced

If you're told to walk the plank these days, you may find yourself walking on plastic. SABIC recently introduced its STADECK heavy-duty panels to the Americas. These high-strength but extremely lightweight panels are used for scaffolding and numerous other applications in the building and construction industries. They are made from glass fiber-reinforced thermoplastic resin and are up to 60 percent lighter than wooden planks, saving not only your back but also the gas or diesel it takes to tote heavier support materials around. They also never rot or corrode.
Learn more.


Completely updated new full-line catalog of fasteners

Micro Plastics introduces its new 300-page catalog #41 containing thousands of fastening solutions for engineers and product designers. Find hundreds of new problem-solving products including Spacers, Washers, Clips, Clamps, Ties, Bushings, Screws, Nuts, Rivets, and Plugs. Micro Plastics specializes in Nylon threaded fasteners, but the company also offers extensive product lines for wire management and circuit board hardware. Samples are available upon request.
Check out the new online catalog.


Plastic torque-limiting wing nuts

JW Winco, a leading supplier of standard industrial machine components, has now made available EN 5320 Plastic Torque Limiting Wing Nuts, which are used when manually applied torque is to be limited. Turn clockwise, and the torque of the wing nut triggers an "over-engagement" when the specified torque is reached. When tightening, this will ensure the maximum permissible torque is not exceeded. Turn counter-clockwise, and the torque needed for loosening will always be transmitted properly. The technopolymer plastic is glass fiber reinforced and temperature resistant up to 176 F (80 C). The wing nuts are available in either a black matte or orange matte finish. An aluminum version (GN 3663) is also available.
Learn more.


ICOMold: New CAD model design service partner

ICOMold has partnered with a professional design service with a large group of designers who specialize in designing for injection molding. If you need to get a quote but don't have a 3D CAD model (or need your file modified, repaired, or converted), ICOMold is now offering these services through its design partner ZVerse.
Learn more.


GE jet-engine remote visual inspection equipment used to investigate Jerusalem tomb

Specially adapted and standard remote visual inspection (RVI) equipment from the Inspection Technologies business of GE Measurement & Control has been used to carry out an internal inspection of a newly discovered burial tomb, dating from the first century, in Jerusalem. The equipment has provided high-definition video images of ossuaries within the tomb to enable archaeological experts to read the ossuary inscriptions and gain some insight into their provenance. The extent of the discoveries will be revealed in a new documentary film and an accompanying book that was launched February 28 at the Discovery Museum in New York.

A view of the inside of the tomb on the screen of the XLG3. [Image courtesy: GE]

 

 

GE's RVI technology was originally developed for industrial applications such as inspection of jet engines for overhaul and repair. It is used to check for corrosion and cracks in machinery, to peer inside tanks and containers, down pipes, and through all sorts of apparatus on oil platforms, commercial heat exchangers, racecar engine blocks, and power generators. David Jervis, media manager for GE Energy Measurement & Control, describes the equipment use as "virtually any situation where you need to see inside something where your eye won't take you." The U.S. Air Force recently ordered a score of them, he says.

The burial tomb was revealed during building work in the town of East Talpiot, just outside the old city of Jerusalem. Licensed exploration was granted to principal investigators Prof. James D. Tabor of the University of North Carolina (UNC) and Prof. Rami Arav of the University of Nebraska, under the academic supervision of UNC. Religious groups and the Israel Antiquities board stipulated that nobody should enter the tomb, nor should anything be disturbed or retrieved from the tomb as part of the licensed exploration. Fortunately, it was recalled that GE remote visual inspection equipment had been used during a similar tomb exploration in 2005 and consequently contact was re-established.

The PTZ camera inside the tomb, illuminated by the XLG3. [Image courtesy: GE]

 

 

Bill Tarant, GE's Ontario sales manager, who carried out the exploration in 2005 and took part in the latest project, explains the problems faced. "In 2005, we gained entry to the tomb through a soul pipe. With the current project, we had to drill three eight-inch holes through two meters of rock into the tomb. The tomb was one meter in height, but any inspection equipment needed to be able to extend over three meters to obtain the required coverage. We solved the problem by using a mechanical/pneumatic arm, designed by Walter Klassen, who is a well-known prop maker for feature films. This was fitted to a GE CA-Zoom PTZ (pan-tilt-zoom) camera, which was used to obtain the images inside the tomb. A second CA-Zoom PTZ was inserted in one of the other holes to monitor the movement of the first camera."

XLG3 video probe. [Image courtesy: GE]

 

 

Although the first images received were very good, the investigators asked if the definition could be improved to broadcast quality, so that the inscriptions on the ossuaries could be read, not only on site but also by viewers of the film that was being made. This required major development work by GE's engineers, resulting in a customized high-definition camera. To support the CA-Zoom cameras, GE also introduced its XLG3 video probe to provide images of extremely difficult access areas within the tomb. With its very high light output and its unique 360° All-Way articulation, combined with advanced digital signal processing, the XLG3 can be remotely manipulated into the most difficult of locations to provide sharp, high-quality images.

Measurement & Control is a leading innovator in advanced, sensor-based measurement, non-destructive testing and inspection and condition monitoring. For further information, visit www.ge-mcs.com.

Source: GE/GE Reports

Rate this article

[GE jet-engine remote visual inspection equipment used to investigate Jerusalem tomb]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:

Copyright © 2012 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy