July 12, 2022 Volume 18 Issue 26

Mechanical News & Products

Designfax weekly eMagazine

Subscribe Today!
image of Designfax newsletter

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

New 3D-printing resin creates static-dissipative parts

The new xESD resin from Nexa3D, a leading maker of ultrafast professional and industrial polymer 3D printers, is a rigid photoplastic material with a stable carbon nanotube dispersion that delivers optimal static-dissipative performance and isotropic mechanical properties, which are required by the electronics manufacturing industry. The xESD resin allows users to create custom jigs, fixtures, grippers, assembly aides, and enclosures in hours without the risk of ESD damage to high-value electronic components. Available for NXE Pro series printers and the XiP desktop 3D printer.
View the video and learn what else is new from Nexa3D.


Test your knowledge: High-temp adhesives

Put your knowledge to the test by trying to answer these key questions on how to choose the right high temperature-resistant adhesive. The technical experts from Master Bond cover critical information necessary for the selection process, including questions on glass transition temperature and service temperature range. Some of the answers may surprise even the savviest of engineers.
Take the quiz.


Next-gen controlled pneumatics from Festo

Festo's controlled pneumatics combines proportional technology, sensors, and control algorithms to form a control loop. These are mechatronic pneumatic systems with innovative valve and communication technologies that enable digital influence in conjunction with closed-loop control based on a sensor variable. This creates new areas of application, especially for pressure and flow control. Learn about digitized pneumatics in tire manufacturing and how piezo technology increases valve life in wafer manufacturing.
Read the full Festo applications article.


Standard parts in hygienic design from JW Wico

JW Winco has developed a complete product family of special standard parts that combine minimal contamination tendency with optimum cleaning ability to meet the highest sanitary standards. The new GN 6226 spacers, which avoid duplicate mounting surfaces, join the existing range of knobs, U-handles, hand levers, indexing plungers, latches, cover sleeves, leveling feet, and screws. In all cases, stainless steel with vibratory finished or polished surfaces is used as the material.
Learn more.


Small valves prevent big blowups

Smart Products USA says their best example of a true relief valve can be found in Models #103 and #109. Available as a 1/8" Male NPT style, these valves are easily placed into plastic, metal, or other materials with absolutely no tubing involved. While the majority of the company's valves function as both a check and pressure-relief flow control option, Models #103 and #109 are more suited to only relieve pressure. When pressure builds to a designated PSI level, this spring-loaded valve responds and allows flow of liquids/gasses slowly to prevent blowups or damage.
Learn more.


Great Resources: EXAIR Case Study Library

Learn how EXAIR compressed air-operated products improved production rates, lowered defects, increased safety, and provided quick ROI. Each of the more than 40 studies includes an application goal, the process problems before EXAIR, and the final improvements achieved. EXAIR's real-world gains include dollars saved, SCFM saved, decibels lowered, quality improvements, and more.
Check out the case study library.


New igus polymer spherical ball strengthens food safety

To make food-processing facilities and machinery even safer, igus, the Germany-based manufacturer of motion plastics, has launched a new standard in the form of the high-performance plastic iglide A181 as a spherical ball material for the igubal Food Contact (FC) joint system. Moving on stainless steel shafts, the spherical cap is three times more wear resistant than the previous version made from iglide FC180. It also costs 25% less and is self-lubricating, maintenance-free, and FDA and EU 10/2011 compliant.
Learn more.


Photo-chemical etching: What design engineers need to know

Dr. Angel Lopez, director of Business Development at micrometal GmbH, one of Europe's leading photo-chemical etching providers, discusses what considerations design engineers need to bear in mind when working with this versatile and sophisticated metal machining technology that produces complex and feature-rich metal parts and components that are burr and stress free.
Read the full article.


Honing a life-saver for aerospace component maker

Fuse pins are designed to hold a jet engine on a wing, but to break away in emergency situations, allowing the engine to separate from the wing to prevent catastrophic structural failure and fires. Learn how Sonic Industries relies on Sunnen's SV-1000 honing system to produce the 5- to 7-micron ID tolerance and proprietary finish critical to this part's performance. The CNC-controlled SV-1000 allowed Sonic to meet ramped-up customer demand when it replaced a manual honing system, decreasing cycle times dramatically and increasing part production.
Read the Sunnen case study.


Adhesives for titanium: Lap shear strength tests

When it comes to bonding titanium to itself or to other substrates, Master Bond has formulated a range of reliable, high-strength adhesives that yielded excellent results when tested for their lap shear strength using titanium substrates. Titanium is known for its high strength, corrosion resistance, and heat transfer properties. See the results of which epoxies performed the best when also considering different processing and operation conditions.
Read the Master Bond results.


One Touch Fasteners slash set-up times

Quick-release One Touch Fasteners from Fixtureworks provide quick and easy locking and unlocking for fixture plates, covers, machine components, and more. These quarter-turn clamping fasteners have clearly visible ON and OFF markings and are ideal for fast-changeover applications and frequent disassembly, providing reliable hold up to 100 lb. Lots of versions available, including standard, retractable, heavy duty, and knob- and button-locking pins.
Learn more and see case study examples.


Desktop Metal qualifies nickel alloy Inconel 625 for 3D printing on Studio System 2

3D-printer maker Desktop Metal has qualified the use of the nickel alloy Inconel 625 (IN625) for its Studio System, an office-friendly metal additive manufacturing system that prints high-performance metal parts in low volumes for pre-production and end-use applications. IN625 is a high-performance alloy known for high levels of strength, temperature resistance, and corrosion resistance.
Read the full article.


6 advanced FDM 3D-printing tips when adding metal parts to your build

Fused Deposition Modeling (FDM) 3D-printing machines use thermoplastic resins and strong, tough materials for real applications. Learn from the experts at TriMech how to prepare for incorporating metal parts such as bushings, hex nuts, roller chain, and rods into FDM builds to create complicated parts that need to stand up to repeated use.
View the TriMech video.


Electromagnetic interference O-rings case study

Specialty Silicone Products (SSP) recently supplied hot vulcanized EMI (electromag-netic interference) O-rings to a company that needed to replace EMI gaskets that had failed EMC testing. EMI O-rings made of electrically conductive silicones combine reliable environmental sealing and broad temperature resistance with proven levels of shielding against EMI. Learn how hot vulcanizing with a conductive adhesive, the joining process that SSP uses, eliminates EMI leakage and a "hard spot" where ends are joined using a non-conductive adhesive.
Read this informative SSP case study.


5 new manufacturing options from Xometry

Get the parts you need made fast and at a great price. Xometry has added five new manufacturing options to their quoting engine: Die Casting, Metal Extrusion, Metal Stamping, Laser Tube Cutting, and Tube Bending. Experts will manually quote these options and work closely with you to ensure the best outcome and success. Get your quote today, and get started on your next metal production order.
Learn more.


Scientist develops spray-on antimicrobial plant-based food wrap to replace plastic

Starch-based fibers enhance protection and reduce spoilage.

Aiming to produce environmentally friendly alternatives to plastic food wrap and containers, a Rutgers scientist has developed a biodegradable, plant-based coating that can be sprayed on foods, guarding against pathogenic and spoilage microorganisms and transportation damage.

The scalable process could potentially reduce the adverse environmental impact of plastic food packaging as well as protect human health.

"We knew we needed to get rid of the petroleum-based food packaging that is out there and replace it with something more sustainable, biodegradable, and nontoxic," said Philip Demokritou, director of the Nanoscience and Advanced Materials Research Center, and the Henry Rutgers Chair in Nanoscience and Environmental Bioengineering at the Rutgers School of Public Health and Environmental and Occupational Health Sciences Institute. "And we asked ourselves at the same time, 'Can we design food packaging with a functionality to extend shelf life and reduce food waste while enhancing food safety?'"

Demokritou added, "What we have come up with is a scalable technology, which enables us to turn biopolymers, which can be derived as part of a circular economy from food waste, into smart fibers that can wrap food directly. This is part of new-generation 'smart' and 'green' food packaging."

The research was conducted in concert with scientists at Harvard University and funded by the Harvard-Nanyang Technological University/Singapore Sustainable Nanotechnology Initiative.

Their article, published in the science journal Nature Food, describes the new kind of packaging technology using the polysaccharide/biopolymer-based fibers. Like the webs cast by the Marvel comic book character Spider-Man, the stringy material can be spun from a heating device that resembles a hair dryer and "shrink-wrapped" over foods of various shapes and sizes, such as an avocado or a sirloin steak. The resulting material that encases food products is sturdy enough to protect bruising and contains antimicrobial agents to fight spoilage and pathogenic microorganisms such as E. coli and listeria.

The research paper includes a description of the technology called focused rotary jet spinning, a process by which the biopolymer is produced, and quantitative assessments showing the coating extended the shelf life of avocados by 50%. The coating can be rinsed off with water and degrades in soil within three days, according to the study.

The new packaging is targeted at addressing a serious environmental issue: the proliferation of petroleum-based plastic products in the waste stream. Efforts to curb the use of plastic, such as legislation in states like New Jersey to eliminate plastic shopping bag distribution at grocery stores, can help, Demokritou said, but he wanted to do more.

"I'm not against plastics," Demokritou said. "I'm against petroleum-based plastics that we keep throwing out there because only a tiny portion of them can be recycled. Over the past 50 to 60 years, during the age of plastic, we've placed 6 billion metric tons of plastic waste into our environment. They are out there degrading slowly, and these tiny fragments are making it into the water we drink, the food we eat, and the air we breathe."

Rising evidence from Demokritou's research team and others point to potential health implications.

The paper describes how the new fibers encapsulating the food are laced with naturally occurring antimicrobial ingredients -- thyme oil, citric acid, and nisin. Researchers in the Demokritou research team can program such smart materials to act as sensors, activating and destroying bacterial strains to ensure food will arrive untainted. This will address growing concern over food-borne illnesses as well as lower the incidence of food spoilage, Demokritou said.

Source: Rutgers, The State University of New Jersey

Published July 2022

Rate this article

[Scientist develops spray-on antimicrobial plant-based food wrap to replace plastic]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:


Type the number:



Copyright © 2022 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy