September 13, 2022 Volume 18 Issue 34

Electrical/Electronic News & Products

Designfax weekly eMagazine

Subscribe Today!
image of Designfax newsletter

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

Fluke 831 Laser Shaft Alignment Tool

Misalignment causes at least half of all damage to rotating machinery, but instead of fixing the problem, teams often just treat the symptoms by replacing bearings, couplings, and seals. The new Fluke 831 Laser Shaft Alignment Tool makes shaft alignment easy with an intuitive guided user interface that enables quick and complete shaft alignment without advanced training or complicated programs.
Learn more.


Image sensor for virtual reality, drones, machine vision

OMNIVISION has just announced the OG0VE global shutter (GS) image sensor, a small-form-factor, high-sensitivity device for AR/VR/MR, metaverse, drone, machine vision, and barcode scanner products. This new-generation image sensor is 26% smaller and more than 50% more power efficient than its predecessor. It supports one-lane MIPI D-PHY at up to 800 Mbps and was designed to address the high market demand for the smallest and lowest power-consuming cameras.
Learn more.


Smallest Smart Motor Module for DC fan applications

Alpha and Omega Semiconductor Limited has introduced an extension to its compact Smart Motor Module (SMM) family. Available in an ultra-compact, thermally enhanced 3-mm x 3-mm QFN-18L package, the highly integrated AOZ9530QV SMM is a half-bridge power stage with a slew of features and protections that simplify motor drive designs. It is suitable for use in a large number of BLDC fan applications ranging from PC and server fans to seat cooling and home appliances.
Learn more.


Application Note: Wireless -- Decoupling high-frequency signals from a DC supply

From 5G systems to radio and antenna applications, wireless communication accompanies us throughout our daily lives, so the demand for universal high-frequency amplifiers is correspondingly high. By selecting the optimal passive components, the transmission characteristics of the amplifier can be improved during development. A well-designed layout further improves RF performance. The aim is to transmit both RF signals and the DC supply on a single line without interference or cross-talk. A key component is the inductor for decoupling the RF and DC supplies.
Read this in-depth W├╝rth Elektronik application note.


Smallest all-in-one LIN driver propels relay window lifters

Melexis' new LIN pre-driver IC for relay DC motors offers a combination of high power, compactness, and attractive pricing. The MLX81160 is the latest addition to the company's Gen3 family of compatible embedded motor drivers. Its 48-KB of memory (16 KB ROM for the included LIN protocol and 32 KB Flash for the application software) is suitable for applications like window regulators.
Learn more.


Pull-type solenoids in a range to meet tons of applications

Magnetic Sensor Systems (MSS) has released their S-20-100X model of high-efficiency, low-cost Pull Type Tubular Solenoids (1 in. diameter x 2 in. long). Their S-20-100X series features 18 different solenoids to select from based on the voltage, duty cycle, force, and stroke requirement of the user. MSS solenoid coils typically use Class F 23- to 40-AWG windings with Class A insulation for better protection of the solenoid during longer duty cycles. Applications include: vending machines, medical dispensing, mixing, valve control, farm machinery, disconnects, transmission shifting, fire suppression systems, cabinet locks, door controls, and sorting equipment.
Learn more.


Industrial imaging at warp speed

When fast-moving scenes need to be captured in all their details, a high-performance transmission interface is essential in addition to the right sensor. With uEye Warp10, IDS Imaging Development Systems GmbH is launching a new camera family that, thanks to 10GigE, transmits data in the Gigabit Ethernet-based network at a very high frame rate and virtually without delay. The first models with the IMX250 (5 MP), IMX253 (12 MP), and IMX255 (8.9 MP) sensors from the Sony Pregius series are now available.
Learn more.


Top Tech Tips: How to specify electric rod-style actuators for optimal performance, reliability, and efficiency

Andy Zaske, Vice President, Tolomatic, provides his Top 10 Tips for specifying electric rod-style actuators, which have a higher initial cost, more advanced design, and more predictable performance compared to fluid power cylinders. This is a really thorough presentation filled with useful information.
Read the full article.


Standard IP65 slip rings with short lead times

The Orbex Group, a leading manufacturer of high-performance electric motors and slip rings, introduces standard slip rings with an IP65 protection rating, providing washdown tolerance in many food, beverage, and pharmaceutical manufacturing applications. These washdown-ready slip rings feature stainless steel or aluminum housings. They offer flexible mounting options with through-hole diameters ranging from 25 to 100 mm, or capsule style when a through-hole is not required.
Learn more.


New polymers engineered for e-motor applications

Freudenberg Sealing Technologies has expanded the use of its Thermally Conductive, Electrically Insulating (TCEI) materials to produce walled slot liners for electric motor applications. The company's TCEI material grades demonstrate superior thermal conductivity and better electrical insulation when tested against other thermoplastic materials currently available.
Read the full article.


Heatsink solutions for electronic housings

Phoenix Contact has increased the breadth and depth of its popular Industrial Case System (ICS) housing family to include both customizable passive heatsinks and heatsink fillers. New heatsink solutions allow design engineers to choose from a wide range of thermal management solutions to keep their components from overheating. To support the new heatsink solutions, a web-based, intuitive platform for thermal assessment has been incorporated into the Electronic Housing Online Configurator tool on Phoenix Contact's website.
Learn more.


Mini-FAKRA cable assemblies for automotive and industrial applications requiring high data transfer rates

Amphenol RF has expanded its AUTOMATE Type A Mini-FAKRA product series with pre-configured cable assemblies. These assemblies feature a straight quad port mini-FAKRA jack on both ends and are designed on low-loss TFC-302LL. AUTOMATE assemblies support data transmission rates up to 20 Gbps, which makes them ideal for automotive and industrial applications that require high data transfer rates to communicate information for safety, performance, and entertainment without lag.
Learn more.


New compact touchless linear position sensors

The TFD Series of touchless linear position sensors from Novotechnik provides wear-free operation in tight spaces. The TFD-4000 Series uses a magnetic position marker to provide a touchless measurement range of 0 to 14, 24, or 50 mm -- depending on model. These sensors make measurements through air and non-magnetic materials. Sensing direction can be either parallel or perpendicular to mounting holes. Applications include textile, packaging, and sheet metal machinery; medical applications; marine; mobile engine management; and construction, agricultural, and forestry machinery.
Learn more.


Top Tech Tip:
2D, 3D, or 2.5D? Choosing a vision system for your automation project

If you're looking at machine vision systems for automation, you will need to decide whether to invest in a 2D, 3D, or 2.5D camera system. That choice will have a major impact on the deployment's cost, complexity, capabilities, and functionality. OnRobot's Kristian Hulgard, General Manager - Americas, explains the differences, benefits, and shortcomings of each system type.
Read this informative OnRobot article.


Next-generation electronic digital comparators

The Millimess 2000 W(i) and 2001 W(i) Digital Comparators from Mahr set new standards in metrology with unique and innovative features such as touch display, inductive measurement system, and integrated wireless connectivity. The systems combine practical and reliable operation with maximum precision using a unique inductive measuring system.
Learn more.


New on-chip frequency comb is 100x more efficient

A new on-chip frequency comb combines a coupled resonator with an electro-optical frequency comb to improve the efficiency of frequency combs and improve the bandwidth. [Credit: Yiqing Pei/Harvard SEAS]

 

 

 

 

On-chip laser frequency combs -- lasers that emit multiple frequencies or colors of light simultaneously separated like the tooth on a comb -- are a promising technology for a range of applications including environmental monitoring, optical computing, astronomy, and metrology. However, on-chip frequency combs are still limited by one serious problem: They are not always efficient.

There are several ways to mitigate the efficiency problem, but they all suffer from tradeoffs. For example, combs can either have high efficiency or broad bandwidth -- but not both. The inability to design an on-chip laser frequency comb that is both efficient and broad has stymied researchers for years and hindered the widespread commercialization of these devices.

Now, a team from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) has developed an electro-optic frequency comb that is 100 times more efficient and has more than twice the bandwidth of previous state-of-the-art versions.

"Our device paves the way for practical optical frequency comb generators and opens the door for new applications," said Marko Loncar, the Tiantsai Lin Professor of Electrical Engineering at SEAS and senior author of the study. "It also provides a platform to investigate new areas of optical physics."

The research is published in Nature Photonics.

This advancement builds upon previous research from Loncar and his team.

In 2019, Loncar and his lab demonstrated the first stable, on-chip frequency comb that could be controlled with microwaves. This so-called electro-optical frequency comb, built on the lithium niobate platform pioneered by Loncar's lab, spanned the entire telecommunications bandwidth but was limited in its efficiency. In 2021, the team developed a coupled resonators device to control the flow of light, and used it to demonstrate on-chip frequency shifters -- a device that can change the color of light with nearly 100% efficiency.

The latest research applies the two concepts to address the challenge in resonator-based electro-optic frequency combs: efficiency-bandwidth tradeoff.

"We demonstrated that by combining these two approaches -- the coupled resonator with the electro-optical frequency comb -- we could improve the efficiency a lot without sacrificing bandwidth. In fact, we actually improved bandwidth," said Yaowen Hu, a research assistant at SEAS and first author of the paper.

"We found that when you improve the performance of the comb source to this level, the device starts operating in an entirely new regime that combines the process of electro-optic frequency comb generation with the more traditional approach of a Kerr frequency comb," said Mengjie Yu, a former postdoctoral fellow at SEAS and co-first author of the paper.

Yu is currently an assistant professor at the University of Southern California.

This new comb can generate ultrafast femtosecond pulses at high power. Together with the high efficiency and broadband, this device can be useful for applications in astronomy, optical computing, ranging, and optical metrology.

Source: Harvard John A. Paulson School of Engineering and Applied Sciences

Published September 2022

Rate this article

[New on-chip frequency comb is 100x more efficient]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:


Type the number:



Copyright © 2022 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy