March 27, 2012 Volume 08 Issue 12

Mechanical News & Products

Designfax weekly eMagazine

Subscribe Today!
image of Designfax newsletter

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

Round vs. square rails -- which are better for you?

Thomson invented the world's first anti-friction linear ball bushing bearings in 1946. For many years, these round-rail linear guides satisfied every linear motion control requirement. However, as machines required closer tolerances, the round rail didn't always fit the bill. Learn the pros and cons of each design type.
Read this informative Thomson blog.


New bearings reduce wear in heavy-duty applications

igus has introduced a new bearing with an improved iglide material, called TX2, that offers self-lubricating and maintenance-free properties for heavy-duty applications. TX2 increases wear resistance by a factor of 3.5 in load ranges with more than 100-MPa surface pressure. The material is ideal for components in machines that serve construction and agriculture, which can require more than 50 liters of lubricant annually. The material is also very resistant to temperature, chemicals, moisture, corrosion, and seawater, which opens up the applications base for its use substantially.
Learn more.


Aerospace fastener hole drilling and countersinking all in one step

Kennametal has introduced the HiPACS drilling and countersinking system for aerospace fastener holes. Designed to drill and chamfer holes in one operation, the high-precision tool meets the aerospace industry's stringent accuracy requirements while delivering increased tool life in machining composite, titanium, and aluminum aircraft skins. With an industry-standard interface, HiPACS can be utilized on any CNC machine. Three components eliminate the need for custom tooling: a reducer sleeve with a built-in high-precision pocket seat, a PCD countersinking insert, and two series of solid carbide drills.
Learn more.


Why precision metrology is critical for electric vehicle gearing

As the shift from internal combustion engines to electric motors in vehicles continues, the number of drivetrain components will dramatically lessen too. The remaining components will be even more critical to a vehicle's operation and longevity. One such area is the gear components necessary to convert the high-force torque from electric motors to the RPMs at the wheel.
By Michael Schmidt, Zygo Corporation
Read the full article.


Master CNC machining tolerances eBook

Need a refresher on the basics of applying tolerances to custom machined metal and plastic parts? In this ebook, Xometry provides some pointers on designing mating parts and parts for specific functions. Chapters include: general machining tolerances, clearance and interference fit, how to avoid over-tolerancing, CAD drawing prep and specs, and an inspection report cheat sheet.
Get this valuable resource from Xometry.


Specifying metal inserts for molded plastics

Teaming with insert manufacturers that offer engineering expertise throughout the design and manufacturing process can be worth its weight in gold. Learn how two OEMs overcame their metal insert challenges by using advice and products from Tri-Star Industries, including specialty stainless steel parts and modifying the knurling on some inserts.
Read the full article.


Posi-Lok keyless shaft bushings for secure shaft-to-hub connection

Zero-Max offers a variety of options within the Posi-Lok keyless shaft bushings (PSL) product line that allow users to rigidly and reliably secure shaft-mounted components into position for optimal operating results in their machines. Options include material choices, plating, and different mounting methods. Posi-Loks are a superior shaft-hub locking solution, eliminating the need for keyways that can weaken or cause excess wear to shaft components. All Posi-Lok models easily slide onto a shaft for mounting and provide reliable, zero-backlash performance.
Learn more.


Automation: ECONOmaster drilling units -- affordable, flexible, get the job done

Suhner's ECONO-master® is a low-cost, high-output automated drilling unit that puts holes in light metal, composite, thermoplastic, and even wood substrates at high speed with excellent accuracy. It features low power and air consumption. On a recent project for Mid-State Engineering, Suhner custom ECONOmaster drill units -- featuring selectable drill heads that can be used in combination or individually -- were used to automatically drill holes into fiberglass panels for truck trailer bodies.
Read the full article.


Great Resources: Ultimate Guide to Injection Molding

Xometry has put together a comprehensive resource for injection molding -- from the basic principles to applications, tooling, materials, design features, and more. Learn how to optimize your part designs and choose the right surface finishes, textures, and post-processing for your projects. A super-handy resource worth bookmarking.
Read the Xometry Ultimate Guide to Injection Molding.


Sealing fasteners may optimize your designs

Highly specialized sealing fasteners include sealing screws, sealing nuts, sealing bolts, and sealing washers. Unlike ordinary fasteners, sealing fasteners are configured with a rubber O-ring (or a rubber element) that, when squeezed, permanently seals out a wide range of contaminants from entering and damaging equipment while preventing leakage of toxins into the environment. ZAGO sealing fasteners are designed to withstand harsh weather and extreme temperatures and are vibration and pressure resistant.
Learn all about ZAGO's wide selection of sealing fasteners.


Spirit levels with adjustment and cross-measurement

They may seem like relics from the past, but spirit levels remain indispensable tools in everyday industrial operations. Two new types from JW Winco now offer even better and faster alignment. The cross spirit levels GN 2276 combine two perpendicular linear levels within a single, round aluminum housing to show the alignment in two planes at once, making installation and leveling easier and faster. The new screw-on spirit levels GN 2283 are used to check the horizontal position of jigs, machines, devices, appliances, and instruments. These are available in a directly mountable, flat version (AV) and as an adjustable version (JV) with an alignment cam.
Learn more.


New cast urethane materials and finishes

Xometry has added new urethane resins and finishes as options for quick and affordable low- to mid-volume production. Urethane casting is used to make end-use, highly durable parts with robust mechanical properties. It is considered a "soft-tooled" process, where a silicone mold is formed around a master pattern -- usually 3D printed. Xometry has materials in two main durometer classes, rigid (Shore D) and rubber-like (Shore A). Finishes include matte/frosted, semi-gloss, high-gloss, and custom.
Read this informative Xometry blog.
Get the Xometry Urethane Casting Design Guide.


New molded-in aluminum threaded inserts for plastics

SPIROL has introduced a new, high-performance series of Molded-In Inserts for plastics assemblies. The rugged design of the Series 63 Through Hole Inserts and Series 65 Blind End Inserts consists of multiple bands of helical knurls to maximize torque resistance, balanced with radial undercuts to achieve high pull-out (tensile) force. These Molded-In Inserts are designed to be placed in the mold cavity prior to plastic injection. They offer exceptional performance due to unrestricted plastic flow into the retention features on the outside diameter of the Inserts.
Learn more.


How to avoid premature linear screw actuator failure

At their core, electric linear screw actuators deploy mechanical technology such as ball bearings, ball screws, and roller screws that have a finite life. These components do not last forever -- even though that is the expectation of some customers. But how long will an actuator really last? Tolomatic engineers provide a way to calculate, estimate, and size the electric linear screw actuator to achieve the desired life for your applications.
Read this informative Tolomatic blog.


3D Printing: Desktop Metal qualifies 316L stainless steel for high-volume manufacturing -- thousands of parts per week

3D-printer machine maker Desktop Metal has qualified the use of 316L stainless steel for its additive manufacturing platform called the Production System, which provides some of the fastest build speeds in the market for mass production and can make thousands of parts per week. This article includes very useful cost-per-part and time-to-manufacture information using five different application examples.
Read the full article.


Domestic parts shortage for defense? Federal committee seeks information on domestic forging capabilities

Does the United States have sufficient industrial capabilities to produce adequate supplies of forged-quality metal parts to meet the needs of the Defense Department and other federal agencies?

That is what the Metal Fabrication Study Group, part of the interagency Defense Production Act Committee (DPAC), wants to know. The study group recently issued a request for information at FEDBIZOPS.gov.

Responses are due no later than 3 p.m. Eastern Time, April 9, 2012.

Forged-quality parts are essential components of aircraft wheels and landing gear, vehicle armor, energy-generation equipment, railroad cars, rocket engines, and other manufactured products.

The study group, led by Howard Harary, deputy director for manufacturing in the Engineering Laboratory of the National Institute of Standards and Technology, conducted an initial survey of domestic forging capabilities. It found that current capabilities stem from investments made several decades ago, yet the need for forged-quality parts has not diminished. As a consequence, supplies of some critical forged-quality parts have been inadequate to meet important government needs.

In its request, the study group seeks industry insights into ways to address current limitations on supplies of forged-quality parts, as well as to understand the opportunities to address those limitations. Key areas of interest include process capabilities and limitations, supply-chain-related issues, and alternative manufacturing methods and barriers to their implementation.

Under the Defense Production Act of 1950, the DPAC advises the president on strategies to ensure adequate domestic production of critical components, critical technology items, and industrial resources essential for national security.

You can read more about the DPAC here.

The study group's request for information can be found here.

Source: NIST

Published March 2012

Rate this article

[Domestic parts shortage for defense? Federal committee seeks information on domestic forging capabilities]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:


Type the number:



Copyright © 2012 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy