Designfax weekly eMagazine

Subscribe Today!

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

What can replace a coil spring? You've got better options!

Traditional coil springs can limit mechanical designs. Wave springs offer a space-saving alternative, providing equivalent force and deflection in up to half the operating height while reducing assembly size and weight. There are four wave spring types that can replace a coil spring. Learn how each variant delivers unique performance capabilities to optimize space, efficiency, and reliability.
Read this informative NEW Smalley technical article.

Next-gen metal bonding: 3M Scotch-Weld 8500 Series

Replace traditional fasteners and streamline assembly with 3M Scotch-Weld Acrylic Adhesive DP8507NS. Engineered for direct bonding to bare or slightly oily metals with minimal surface prep, this high-performance adhesive withstands paint bake cycles up to 200 C (392 F), resists corrosion, and holds strong down to -40 C. Upgrade durability, aesthetics, and design flexibility. Bonds many plastics too!
View the video.

3 things you need to get right when 3D printing gears

When businesses decide to 3D print their own gears, they can reduce lead times and costs associated with replacements, prototypes, and small-batch production runs significantly. According to the experts at igus, however, "achieving industrial-grade reliability requires more than just a digital file; there are several fundamental technical basics you must master first to ensure your gears can withstand the rigors of real-world use."
Read this informative igus tech tip.

DURACON polymer with 30% recycled content

Daicel Corporation's High Performance Polymers SBU has launched four new DURACON^® POM grades featuring 30% post-consumer recycled (PCR) content. Unveiled at CHINAPLAS 2026, the lineup includes Standard, Low VOC, Sliding, and Tough options. Leveraging advanced compounding expertise, Daicel maintains quality and mechanical performance comparable to standard virgin resin grades for demanding global industrial and automotive components.
Learn more.

Renishaw unveils revolutionary LIBERTAS™ 3DP tech

Renishaw's new LIBERTAS software technology addresses two of the most persistent challenges in metal AM: poor downskin surface finish and the need for support structures. Users have greater freedom to manufacture complex geometries.
Read the full article.

Innovate like a PRO: Protolabs' new AI-enabled manufacturing platform

ProDesk by Protolabs accelerates innovation for product development and procurement teams. It features real-time, AI-powered quoting with design for manufacturability (DFM) analysis across injection molding, CNC machining, and 3D printing. The platform enables seamless team collaboration and customizes quotes with instant feedback on materials, lead times, secondary operations, and finishes prior to production.
Learn more.

SDP/SI Shaftloc Fastening System

Shaftloc is a unique, reusable locking device for securely mounting mechanical components like gears and sprockets onto shafts without the need for keyways, set screws, or adhesives. Its simple, two-piece design offers a cost-effective alternative to traditional fasteners, providing high clamping force and vibration resistance. Installed with standard tools, Shaftloc is perfect for designers seeking flexible, hubless mounting solutions. Available in four styles.
Learn more from SDP/SI.

How Autodesk Research uses Markforged 3D printing

In advanced R&D, "good enough" doesn't cut it. To pioneer its Performance-Aided Design (PAD) workflow, Autodesk Research partnered with Markforged to close the gap between digital simulation and reality. Using sensors and digital twins, PAD replaces delayed field reports with real-time feedback. To test this high-stakes system, Autodesk built massive UAV platforms -- including a 300-lb aircraft. Facing extreme dynamic loads and weather, these drones provide the ultimate torture test for rapid design iteration.
View the video.

Top Tech Tip: How do you 3D print STL files?

Learn the basics of 3D printing STL files -- the files that serve as the digital foundation for 3D printing -- and a whole lot more from the experts at Xometry. These files have advantages, of course, but did you know they have disadvantages too? Also learn about STL tools and programs, and how to reduce file size or even repair a file you are having trouble with.
Read the Xometry article.

When metals can't survive: Machined ceramics as an alternative

Technical Ceramics are so hard and wear resistant that they cannot be machined with conventional tools -- but they can outlast and outperform other materials in demanding or harsh applications. INSACO's proprietary diamond grinding process and specialized techniques developed over many decades allow the company to produce and document parts to exacting specifications consistently. Learn all about the alternatives you have when metals just can't take it.
Read the INSACO article.

Radio Flyer cuts ebike prototype time radically with Fuse X1 large-format SLS 3D printer

Radio Flyer cut prototype lead times for its Flyer Loop cargo ebike frame from two months to two days using Formlabs' new Fuse X1 SLS large-format 3D printer. "We can now print an entire Flyer Loop cargo ebike overnight and be gluing it together the next day," said Agostino LoBello, product development engineer at Radio Flyer. "I can iterate three times as often with nine times less labor." The Fuse X1 delivers production-quality parts with 50% lower costs and triple the throughput of comparable industrial systems, featuring automated powder handling and a compact, easy-to-install design. [Credit: Image courtesy of Formlabs]
View the video.

Compact industrial sand 3D printer

ExOne has launched the S-Print Pro, a compact industrial sand 3D printer that brings production-grade binder jetting to smaller foundries, pattern shops, and print service providers. Aimed at businesses competing on cost and flexibility, it handles low-volume casting, spare parts, and custom components. The system processes furan binder with silica sand, CeraBeads, or silicon carbide.
Learn more about this capable machine.

Engineer's Toolbox: How to pin a shaft and hub assembly properly

One of the primary benefits of using a coiled spring pin to affix a hub or gear to a shaft is the coiled pin's ability to prevent hole damage. Another is the coiled pin absorbs wider hole tolerances than any other press-fit pin. This translates to lower total manufacturing costs of the assembly. However, there are a few design guidelines that must be adhered to in order to achieve the maximum strength of the pinned system and prevent damage to the assembly.
Read this very informative SPIROL article.

Get reliable labeling done right

Videojet Technologies has released the Videojet 9310 label applicator, designed to simplify everyday labeling on rigid and flexible packaging. Using Intelligent Motion technology, it digitally controls label tension and alignment to ensure consistent placement with minimal manual adjustments. The system features a simple label path, an intuitive touchscreen, and flexible mounting options to reduce downtime and keep production moving.
Learn more.

Your phone is now your smartest hydraulic tool

Commissioning a proportional valve traditionally requires cables, laptops, and complex software. The new Bosch Rexroth 4WRAE valve changes that. Featuring integrated digital electronics and Bluetooth connectivity, it pairs with the "easy2connect" app. Technicians can now visualize performance, adjust settings, diagnose errors, and force solenoids directly from their phones, simplifying setup for IO-Link or analog systems.
Learn more.

Soft contact lenses engineered to repair themselves with UV light

Contact lenses are a great vision correction option for many, but if one of them gets damaged, there is little to do other than throw it away. A team reporting in ACS Applied Polymer Materials has a solution: special polymer hydrogels and UV light. Scratches on lenses made from their new material were easily repaired with an hour of UV light exposure. This demonstration is a first step toward the next generation of contact lenses.

Scratches in this new contact lens material (top) repair themselves almost completely after one hour of UV light exposure (bottom). [Credit: Adapted from ACS Applied Polymer Materials 2026, DOI: 10.1021/acsapm.5c04803]

 

 

 

 

Commonly used "soft contacts" are made from hydrogels: porous, water-filled networks of polymers. Hydrogel lenses can be scratched or become cloudy from normal wear and tear or from dust and debris. Currently, there are no methods for repairing a contact lens once it is damaged, which can be annoying and expensive. So, Jung-Hyun Choi and Byoung-Ki Cho wanted to develop a self-healing hydrogel material for repairable contact lenses.

Previously, the researchers created a hydrogel that repaired itself after being heated for several hours; however, this was not ideal for contact lenses because extended heating causes the delicate lens to dry out. So, this time they used UV light to initiate a self-healing chemical reaction at room temperature.

Choi and Cho built the hydrogel using a disulfide cross-linker and methacrylate polymer. Then, they coated it with a different polymer to help prevent bacterial growth and surface scratches. When a damaged hydrogel was exposed to UV light (365 nm in wavelength) at room temperature for one hour, the energy from the light induced a process known as disulfide exchange. Here, existing sulfur-to-sulfur bonds break and form new bonds with other sulfur atoms, slowly knitting the hydrogel back together. In tests, this healing process was highly efficient, resulting in a near-seamless lens. According to Cho, the repair process can be repeated and could even be conducted using at-home UV lamps, such as those used as cleaning devices or for curing gel nail polish.

In addition, a lens formed from the coated hydrogel had mechanical properties, including water retention, similar to those expected for soft contacts. The specialized anti-scratch coating even prevented scratches from fine-grit sandpaper, dropping in transparency only by about 2% after abrasion.

Before these lenses can be found on store shelves, they will need to go through additional stability testing and regulatory approval. The researchers hope that this work could lead to contact lenses that are more robust.

Source: American Chemical Society (ACS)

Published July 2026

Rate this article