Designfax weekly eMagazine

Subscribe Today!

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

How ball spline coatings enhance performance and extend component life

According to Thomson, "Precision ball splines have gained popularity as an ideal choice for applications that require low-friction linear and rotary motion. These components, which utilize a single splined shaft, enable complex movements in multiple directions." But how do you keep these ball splines performing at their peak for longer? Coatings can do the trick, and Thomson has three of them: black oxide, hard chrome plating, and nickel plating. Learn more about these coatings and which one makes the most sense for your precision ball spline solution.
View the video.

Key factors for ball screw applications

Learn the six key factors that should be considered when specifying ball screw assemblies in motion control applications. PCB Linear gathered a panel of experts in the field of linear motion to concentrate on this important topic -- particularly when it comes to the company's new miniature ball screw product line. Learn about precision and accuracy, orientation, speed and acceleration, duty cycle, linear motion travel, and load capacity. Podcast available too.
Read the PCB Linear blog.

3D printer uses pellet extrusion system instead of filament

The latest addition to 3D Systems' industry-leading portfolio of EXT Titan Pellet systems is the EXT 800 Titan Pellet. With a build volume of 800 x 600 x 800 mm, this thermoplastics 3D printer harnesses the speed, reliability, and efficiency of the company's large-format pellet systems in a more compact unit with lower upfront investment. Use this machine to fabricate more modestly sized functional prototypes, tooling, fixtures, sand casting patterns, thermoforming molds, and end-use parts. Markedly faster than competing FFF and FDM printers, and up to 10X reduced material costs compared to filaments.
Learn more.

Test your knowledge: High-temp adhesives

Put your knowledge to the test by trying to answer these key questions on how to choose the right high-temperature-resistant adhesive. The technical experts from Master Bond cover critical information necessary for the selection process, including questions on glass transition temperature and service temperature range. Some of the answers may surprise even the savviest of engineers.
Take the quiz.

World's first current-carrying fastening technology

PEM^® eConnect™ current-carrying pins from Penn-Engineering provide superior electrical connections in applications that demand high performance from internal components, such as automotive electronics. This first-to-market tech provides repeatable, consistent electrical joints and superior installation unmatched by traditional fastening methods. Features include quick and secure automated installation, no hot spots or poor conductivity, and captivation options that include self-clinching and broaching styles.
Learn more about eConnect pins.

New flat quarter-turn clamping fastener

IMAO Fixtureworks has expanded its One-Touch Fastener lineup to include a new quarter-turn clamping fastener that features an innovative flat design and is ideal for clamping in limited spaces. The QCFC flat quarter-turn fastener features a recessed body that protrudes only 2 mm from the mounted surface, a knob that rests flush inside the body, visible ON and OFF markings for safety, and an audible click when fully turned to clamped or unclamped position.
Learn more.

Bellows and disc couplings with higher torque capacity

Ruland Manufacturing now offers bellows and double disc couplings with bore sizes up to 1-3/4 in. or 45 mm for use in systems with torque up to 1,400 in.-lb (158 Nm). High-torque applications in precision semiconductor, solar, conveyor, and factory automation applications often use these shaft sizes. Ruland disc and bellows couplings accommodate all forms of misalignment, are zero-backlash, and have a balanced design for reduced vibration at speeds up to 10,000 rpm.
Learn more.

Simplify your designs with slewing ring bearings

According to Kaydon Bearings, "A slewing ring bearing has rolling elements designed to create a reactive moment within the bearing's dimensions envelope to oppose applied (overturning) moment load," so you can use one bearing instead of two, reducing the height requirements, and even improve performance. Slewing ring bearings can also simplify a drive system by utilizing gear teeth on the inner or outer race. Learn all about slewing ring bearings in this informative article.
Read the Kaydon whitepaper.

Jet valve for ultra-small dispensing

DELO's DELO-DOT PN5 LV pneumatic jet valve is designed for micro-dispensing low-viscosity adhesives and other media in miniaturized applications. Thanks to its compact design, it also requires very little space to install in production systems. Interchangeable nozzles with different diameters and a flexible, adjustable plunger stroke ensure precise and reliable applications at different droplet sizes. Volumes of as low as 1 nl can be achieved, which corresponds to droplet diameters of 250 µm or less.
Learn more.

Stainless steel constant-torque flush-mount hinge

Southco has introduced a flush-mount version of its popular and durable E6 constant-torque hinge. Its low-profile, corrosion-resistant package makes it an ideal solution for maximizing security, longevity, and aesthetics. It offers high torque for demanding applications while maintaining its low profile. Lots of uses.
Learn more.

Claw vacuum pump for industrial applications

Vacuum expert Leybold has added a new model to its proven CLAWVAC dry claw vacuum pump series: the CLAWVAC CP B. This innovative, rough vacuum pump, designed for robust processes including food processing, material handling, and environmental industries, is powerful, energy efficient, and easy to clean. The intuitive handling of this unit is mainly due to its functional design, which features a pair of claws that rotate in the cylinder with no contact or wear. Its separate gearbox prevents oil contamination. The design ensures short downtimes and long service intervals: 20,000 hr between oil changes and up to 48,000 hr between general overhauls.
Learn more.

DualVee linear guides and tracks used in warehousing

See how Bishop-Wisecarver's DualVee^® motion tech can add huge benefits to warehousing operations. This video highlights two applications: a manual storage and retrieval system and an automated storage and retrieval system of long aerospace-grade carbon fiber in sub-zero temps. Patented DualVee guides and tracks keep operations running smoothly.
View the video.

Build-to-order knobs and hand hardware

Rogan Corp.'s innovative use of two-shot plastic injection and insert molding has been providing customers with high-quality plastic clamping knobs, levers, and control knobs for almost 90 years. Rogan offers concurrent engineering, product design, and assistance in material selection to ensure customer satisfaction for standard or customized parts, with a focus on cost optimization and on-time delivery. Custom colors, markings, decorative inlays, or engineered materials to meet special requirements, such as adding extra strength or utilizing flame-retardant material, are all offered.
Learn more.

Slewing ring bearing made of wood and plastic

The PRT-02-30-WPC slewing ring bearing is another step forward by igus toward integrating renewable raw materials into industrial production. Made of 50% wood and 50% high-performance plastics, the cost-effective and lubrication-free slewing ring bearing balances strength and durability with a proven low CO2 footprint. The materials incorporate solid lubricants, making the new slewing ring bearing smooth running and maintenance-free.
Learn more.

Flex Locators for quick fixture changeover

Flex Locators from Fixtureworks are designed for quick changeover of small and large fixtures, automation components, and more. They are ideal for applications that require frequent disassembly, providing excellent repeatability for locating and clamping in a single operation. Manual and pneumatic versions are available. Just turn the handle, knob, or screw!
View the video.

Alcoa licenses breakthrough tech for mass production of aluminum-intensive vehicles

Alcoa has announced that its "Alcoa 951" pre-treatment bonding technology, which is an enabler for adhesive bonding of automotive structures, has been licensed to Chemetall in an exclusive global distribution agreement.

The Alcoa technology is lauded as the new pre-treatment bonding standard for aluminum sheet, extrusion, and casting suppliers across the automotive industry. Chemetall is the leading supplier of surface treatments to the automotive industry, globally.

The use of aluminum in cars is expected to nearly double by 2025, according to automotive OEMs, and aluminum is already the second-most-used material to produce cars. As OEMs work to continue to make cars more fuel efficient, many are expanding aluminum use from heat exchangers, wheels, drive shafts, engine blocks, hoods, and deck lids to developing aluminum-intensive vehicles (AIVs) by converting the body in white, or body structure, to aluminum. As OEMs use aluminum body structures to improve fuel efficiency, new joining and assembly methods are required. This is where Alcoa 951 comes in: It is a patented, non-chrome approach for enhancing bond durability and enabling more cost-effective mass production of AIVs.

Alcoa says that, in customer trials, Alcoa 951 has been proven to be up to nine times more durable than titanium zirconium applications used in the automotive industry in the past. These results led OEMs to specify Alcoa 951 and request Alcoa to license it to other suppliers in the industry, hence the agreement with Chemetall. Alcoa 951 technology is being incorporated into the $300 million automotive expansion underway at Alcoa's Davenport (Iowa) Works facility, scheduled for completion by the end of 2013.

"The process was developed as a result of collaboration between the Alcoa Technical Center and our automotive business," says Dr. Raymond Kilmer, Alcoa executive vice president and chief technology officer. The Alcoa Technical Center is the world's largest light metals research facility and is located outside Pittsburgh, PA.

More about Alcoa 951 adhesive bonding
Alcoa 951 employs an organic, environmentally friendly system tailored for both the aluminum substrate and the structural adhesives used for joining. The pre-treatment delivers far superior bond durability compared to conversion coating systems such as the titanium zirconium often used in the past. In fact, customer trials show its durability is up to nine times stronger than titanium zirconium.

The surface treatment is applied through an immersion or spray application in which the organic components bond with oxides present on the metal surface. The molecular structure chemically binds aluminum oxide with one end, and adhesive with the other. This creates a strong link at the molecular level, resulting in lasting, durable joints for automotive structures.

The minimal level of treatment on the surface makes it essentially "transparent" to downstream steps in the automotive manufacturing process such as forming, resistance spot welding, and painting.

Other commercially available conversion coatings, which generally contain heavy metals and are measurably thicker, can lead to potential environmental concerns and diminished performance in other steps in the manufacturing process.

The attractiveness of Alcoa 951 lies in its repeatability and its simplicity. It does not incorporate exotic components that threaten the ability to implement the product on a large scale, and it brings the type of benign environmental impact that addresses the need for the "cradle-to-cradle" life cycle required for aluminum.

Source: Alcoa

Published April 2013

Rate this article