Designfax weekly eMagazine

Subscribe Today!

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

What can replace a coil spring? You've got better options!

Traditional coil springs can limit mechanical designs. Wave springs offer a space-saving alternative, providing equivalent force and deflection in up to half the operating height while reducing assembly size and weight. There are four wave spring types that can replace a coil spring. Learn how each variant delivers unique performance capabilities to optimize space, efficiency, and reliability.
Read this informative NEW Smalley technical article.

Next-gen metal bonding: 3M Scotch-Weld 8500 Series

Replace traditional fasteners and streamline assembly with 3M Scotch-Weld Acrylic Adhesive DP8507NS. Engineered for direct bonding to bare or slightly oily metals with minimal surface prep, this high-performance adhesive withstands paint bake cycles up to 200 C (392 F), resists corrosion, and holds strong down to -40 C. Upgrade durability, aesthetics, and design flexibility. Bonds many plastics too!
View the video.

3 things you need to get right when 3D printing gears

When businesses decide to 3D print their own gears, they can reduce lead times and costs associated with replacements, prototypes, and small-batch production runs significantly. According to the experts at igus, however, "achieving industrial-grade reliability requires more than just a digital file; there are several fundamental technical basics you must master first to ensure your gears can withstand the rigors of real-world use."
Read this informative igus tech tip.

DURACON polymer with 30% recycled content

Daicel Corporation's High Performance Polymers SBU has launched four new DURACON^® POM grades featuring 30% post-consumer recycled (PCR) content. Unveiled at CHINAPLAS 2026, the lineup includes Standard, Low VOC, Sliding, and Tough options. Leveraging advanced compounding expertise, Daicel maintains quality and mechanical performance comparable to standard virgin resin grades for demanding global industrial and automotive components.
Learn more.

Renishaw unveils revolutionary LIBERTAS™ 3DP tech

Renishaw's new LIBERTAS software technology addresses two of the most persistent challenges in metal AM: poor downskin surface finish and the need for support structures. Users have greater freedom to manufacture complex geometries.
Read the full article.

Innovate like a PRO: Protolabs' new AI-enabled manufacturing platform

ProDesk by Protolabs accelerates innovation for product development and procurement teams. It features real-time, AI-powered quoting with design for manufacturability (DFM) analysis across injection molding, CNC machining, and 3D printing. The platform enables seamless team collaboration and customizes quotes with instant feedback on materials, lead times, secondary operations, and finishes prior to production.
Learn more.

SDP/SI Shaftloc Fastening System

Shaftloc is a unique, reusable locking device for securely mounting mechanical components like gears and sprockets onto shafts without the need for keyways, set screws, or adhesives. Its simple, two-piece design offers a cost-effective alternative to traditional fasteners, providing high clamping force and vibration resistance. Installed with standard tools, Shaftloc is perfect for designers seeking flexible, hubless mounting solutions. Available in four styles.
Learn more from SDP/SI.

How Autodesk Research uses Markforged 3D printing

In advanced R&D, "good enough" doesn't cut it. To pioneer its Performance-Aided Design (PAD) workflow, Autodesk Research partnered with Markforged to close the gap between digital simulation and reality. Using sensors and digital twins, PAD replaces delayed field reports with real-time feedback. To test this high-stakes system, Autodesk built massive UAV platforms -- including a 300-lb aircraft. Facing extreme dynamic loads and weather, these drones provide the ultimate torture test for rapid design iteration.
View the video.

Top Tech Tip: How do you 3D print STL files?

Learn the basics of 3D printing STL files -- the files that serve as the digital foundation for 3D printing -- and a whole lot more from the experts at Xometry. These files have advantages, of course, but did you know they have disadvantages too? Also learn about STL tools and programs, and how to reduce file size or even repair a file you are having trouble with.
Read the Xometry article.

When metals can't survive: Machined ceramics as an alternative

Technical Ceramics are so hard and wear resistant that they cannot be machined with conventional tools -- but they can outlast and outperform other materials in demanding or harsh applications. INSACO's proprietary diamond grinding process and specialized techniques developed over many decades allow the company to produce and document parts to exacting specifications consistently. Learn all about the alternatives you have when metals just can't take it.
Read the INSACO article.

Radio Flyer cuts ebike prototype time radically with Fuse X1 large-format SLS 3D printer

Radio Flyer cut prototype lead times for its Flyer Loop cargo ebike frame from two months to two days using Formlabs' new Fuse X1 SLS large-format 3D printer. "We can now print an entire Flyer Loop cargo ebike overnight and be gluing it together the next day," said Agostino LoBello, product development engineer at Radio Flyer. "I can iterate three times as often with nine times less labor." The Fuse X1 delivers production-quality parts with 50% lower costs and triple the throughput of comparable industrial systems, featuring automated powder handling and a compact, easy-to-install design. [Credit: Image courtesy of Formlabs]
View the video.

Compact industrial sand 3D printer

ExOne has launched the S-Print Pro, a compact industrial sand 3D printer that brings production-grade binder jetting to smaller foundries, pattern shops, and print service providers. Aimed at businesses competing on cost and flexibility, it handles low-volume casting, spare parts, and custom components. The system processes furan binder with silica sand, CeraBeads, or silicon carbide.
Learn more about this capable machine.

Engineer's Toolbox: How to pin a shaft and hub assembly properly

One of the primary benefits of using a coiled spring pin to affix a hub or gear to a shaft is the coiled pin's ability to prevent hole damage. Another is the coiled pin absorbs wider hole tolerances than any other press-fit pin. This translates to lower total manufacturing costs of the assembly. However, there are a few design guidelines that must be adhered to in order to achieve the maximum strength of the pinned system and prevent damage to the assembly.
Read this very informative SPIROL article.

Get reliable labeling done right

Videojet Technologies has released the Videojet 9310 label applicator, designed to simplify everyday labeling on rigid and flexible packaging. Using Intelligent Motion technology, it digitally controls label tension and alignment to ensure consistent placement with minimal manual adjustments. The system features a simple label path, an intuitive touchscreen, and flexible mounting options to reduce downtime and keep production moving.
Learn more.

Your phone is now your smartest hydraulic tool

Commissioning a proportional valve traditionally requires cables, laptops, and complex software. The new Bosch Rexroth 4WRAE valve changes that. Featuring integrated digital electronics and Bluetooth connectivity, it pairs with the "easy2connect" app. Technicians can now visualize performance, adjust settings, diagnose errors, and force solenoids directly from their phones, simplifying setup for IO-Link or analog systems.
Learn more.

Airport security simplified? Researchers work on low-power metal detector with no walk-through

Device designed for security systems can be built smaller, without the need for an active, energy-extensive doorway.

Most traditional electromagnetic methods for detecting hidden metal objects involve systems that are heavy, bulky, and require lots of electricity.

Recent studies have shown metallic objects have their own magnetic fingerprints based on size, shape, and physical composition. In AIP Advances, from AIP Publishing, scientists look to leverage these observations to potentially create a smaller and cheaper system that is just as effective as their larger counterparts.

Researchers demonstrated the use of a new type of magnetic-based metal-detection security system using magnetic fingerprinting to identify hidden metal objects more efficiently. By using materials in an emerging field known as weak magnetic detection, the device identified a wide variety of metallic objects, ranging from cellphones to hammers.

The magnetic gradient full-tensor fingerprints-based security system using anisotropic magnetoresistance sensor arrays. [Credit: Huan Liu]

 

 

The early results helped establish magnetic fingerprinting as a feasible path forward in security detection.

"The achievement of applying magnetic anomaly detection technology in magnetic sensor arrays promises smart public security sensing systems with low cost, small size, and low power budgets," said Huan Liu, an author on the paper. "Unlike other electromagnetic detection methods, it doesn't require someone to walk through a door framework and can be built in a compact size."

Most of today's security metal detectors only function when the user is actively searching for a metallic object, often by using some form of radiation. Such active screening requires machines to be bulky and demand a lot of energy.

In contrast, the group's device can operate in a passive mode, significantly reducing the energy required for operation. This also potentially allows the technology to be portable and not need to rely on the constrained, threshold type of metal detectors that the public is used to experiencing.

The approach integrates three arrays of anisotropic magnetoresistance sensors with a microcontroller, computer and battery. After 2D magnetic data is gleaned from the device, the researchers developed a computer workflow that processes the data and its fingerprint, removing noise.

The approach was able to identify fingerprints for objects larger than 16 in. and identify multiple objects separated by less than 8 in.

"The major challenge in designing a weak magnetic detection-based public security system may lie in the difficulty to distinguish the weak object signals, like scissors and hammers, from unknown interference, which would decrease the signal-to-noise ratio and the range of the detection zone," Liu said.

The group next hopes to better optimize the device's ability to accurately identify fingerprints from farther distances.

"Magnetic gradient full-tensor fingerprints for metallic objects detection of a security system based on anisotropic magnetoresistance sensor arrays" was authored by Huan Liu, Xiaobin Wang, Junchi Bin, Haobin Dong, Jian Ge, Zheng Liu, Zhiwen Yuan, Jun Zhu, and Xinqun Luan. It appeared in the journal AIP Advances in January.

Source: AIP

Published March 2020

Rate this article