Click this link if you cannot read the issue below: Designfax - Tech for OEM Design Engineers
July 26, 2022Volume 18 Issue 28


Image - Get Quotes on Machining, Die Casting, Tube Bending & Cutting, Stamping and Extrusion From Xometry
Get Quotes on Machining, Die Casting, Tube Bending & Cutting, Stamping and Extrusion From Xometry
With high quality standards, ITAR registration, and short lead times, Xometry can help you get the metal prototypes and production parts you need.

For machining, cutting, bending, stamping and extrusion -- Xometry is your one-stop shop. 3D printing and injection molding are also available.
Get your quote today.


In this issue of Designfax

  • Swiss Air covers Boeing 777 fleet with sharkskin film
  • Ford Bronco Raptor: Off-roading to the max
  • Torpedo-like kills from the air: Air Force QUICKSINK
  • Ferrari 296 Gran Turismo Spider: High-end fun
  • 2024 all-electric Chevrolet Silverado pickup
  • New turret for Army Armored Multi-Purpose Vehicle
  • Cummins fuel-agnostic internal combustion powertrains
  • Electro corrosion in e-motors gets a fix
  • New 3D-printable foam expands after heating
  • Top Engineer's Toolbox: Three steps to mount a step motor
  • Machine Building: Frames with internal cable guide
  • In-wheel motor unit upgraded to carry 500 lb
  • Ceramic matrix composites in F-35 fighter jet engine
  • Top Tech Tip: Resonance problems in stepper motors
  • Videos+: Technologies and inspiration in action
    • Pilot recounts tales of SR-71 Blackbird
    • What's a magnetic GHOST fastener?
    • Hevi-Rail Linear Bearings for telescopic racking
  • Most Popular Last Issue
    • How a NASA engineer created modern airplane wing
    • What is a C-Flex Pivot Bearing?
    • 1/4 ton of refrigeration: EXAIR Vortex Tube
  • New Products
    • Electrical, Mechanical, Motion
    Cover Image: Ferrari 296 GTS, Ford Bronco Raptor, SR-71 Blackbird

News

Latest cool military tech: Drone surveillance system fits in pickup bed -- monitors 500 targets simultaneously

Researchers shrink camera to the size of a salt grain

Ford Motor Co. splitting into distinct electric, internal combustion engine, and commercial divisions

New lightweight polymer is stronger than steel



Feature articles

Image - Swiss Air Lines covering entire Boeing 777-300ER fleet with sharkskin film
Swiss Air Lines covering entire Boeing 777-300ER fleet with sharkskin film
Swiss International Air Lines is equipping its entire Boeing long-haul fleet with fuel-saving AeroSHARK exterior film. It's the first passenger airline worldwide to use the innovative surface technology developed by Lufthansa Technik and BASF.
Read the full article.

Image - Ford Bronco Raptor: Off-roading to the max
Ford Bronco Raptor: Off-roading to the max
Potential buyers of the wildly popular Ford Bronco have a new high-end option to consider if they want to take it up a notch or 10. The Bronco Raptor provides off-roaders with next-level performance in the form of the world's first Ultra4 Racing-inspired SUV.
Read the full article.

Image - Torpedo-like kills from the air: Air Force tests QUICKSINK smart anti-ship missile
Torpedo-like kills from the air: Air Force tests QUICKSINK smart anti-ship missile
The U.S. Air Force Research Lab and its testing team recently demonstrated a new low-cost, air-delivered capability for defeating maritime threats by successfully destroying a full-scale surface vessel in the Gulf of Mexico.
Read the full article.

Image - Ferrari 296 Gran Turismo Spider: High-end fun
Ferrari 296 Gran Turismo Spider: High-end fun
The new 830-hp Ferrari 296 Gran Turismo Spider (GTS) is an updated classic that exudes power and fun. From its new-design retractable hardtop to its special turbo-charged V6 coupled with a rear-drive electric motor, it's a license to thrill for Prancing Horse fans.
Read the full article.

Image - 2024 all-electric Chevrolet Silverado pickup aims for 400 miles per charge and a lot of utility
2024 all-electric Chevrolet Silverado pickup aims for 400 miles per charge and a lot of utility
Chevrolet's first all-electric pickup will wear the nameplate of its popular, full-size Silverado light-duty model -- a direct competitor to Ford's new Lightning F-150 EV. The Silverado EV will come in two variants, WT (Work Truck) and RST, and eventually offer a slew of options, including up to 664 hp with more than 780 lb-ft of torque, four-wheel drive, and 400+ miles of range.
Read the full article.

Image - New Soldier-protection turret developed for Army's Armored Multi-Purpose Vehicle
New Soldier-protection turret developed for Army's Armored Multi-Purpose Vehicle
Soldiers are getting a chance to evaluate and train with a new armored turret system for the Armored Multi-Purpose Vehicle, part of the Next Generation Combat Vehicle modernization program. The OCWS turret protects the vehicle commander, who operates as the gunner on the top side of the vehicle.
Read the full article.

Image - Cummins creating industry-first fuel-agnostic internal combustion powertrains
Cummins creating industry-first fuel-agnostic internal combustion powertrains
Powertrains leader Cummins is taking a mix-and-match approach to creating the internal combustion engines of the future. The company's new platforms will use engine blocks and core components that share common architectures but will be optimized for different low-carbon fuel types such as natural gas and hydrogen.
Read the full article.

Image - Electro corrosion in e-motors gets a fix with new Freudenberg solution
Electro corrosion in e-motors gets a fix with new Freudenberg solution
Did you know that some electric vehicle (EV) motors can incur bearing damage over time caused by a phenomenon called electrically induced corrosion? Well, they can, and Freudenberg Sealing Technologies has a clever and quite simple solution for it.
Read the full article.

Image - New 3D-printable foam expands to full size after heating
New 3D-printable foam expands to full size after heating
When we first heard about the new FreeFoam material invented by Adaptive3D that can be 3D printed and later heated to expand to its final, intended full size, we thought, "Hmmm ... that's weird," but later it dawned on us that this is incredibly useful -- especially given current supply-chain challenges.
Read the full article.

Image - Top Engineer's Toolbox: Three steps to mount a step motor
Top Engineer's Toolbox: Three steps to mount a step motor
Jeff Kordik, chief technical officer, Applied Motion Products, runs through the basic steps to mount a step motor and also covers key mounting dimensions. He provides his pro tips along the way and also gives tips for determining proper step motor torque as a sidebar. Lots of good info here.
Read the full article.

Image - Machine Building: Frames feature internal cable guide
Machine Building: Frames feature internal cable guide
When machine frames are designed, cabling is often an afterthought. Not anymore. Bosch Rexroth's new function-integrated profiles (FIPs) feature a fully internal cable guide that can run through and out of profile junctions. The FIP range comprises four profile cross-sections, with a catalog of accessories that also complements the modular system.
Read the full article.

Image - In-wheel motor unit upgraded to carry 500 lb
In-wheel motor unit upgraded to carry 500 lb
The MobilePower Wheel Drive from ElectroCraft combines optimum performance with high efficiency, quiet operation, and long life -- and now it can handle heavier loads. The MPW86 features a high-torque-density brushless DC motor with a heavy-duty integrated planetary gearbox mounted inside the hub of a lightweight aluminum wheel with custom tread.
Read the full article.

Image - All about the ceramic matrix composites in GE's adaptive cycle engine for F-35 fighter jets
All about the ceramic matrix composites in GE's adaptive cycle engine for F-35 fighter jets
GE has provided details of using ceramic matrix composites (CMCs) in the XA100 adaptive cycle engine for the Lockheed Martin F-35 jet fighter. The new engine can switch between high-thrust and high-efficiency modes. The CMC super materials have helped create an engine "with 25% better fuel efficiency, 10%+ better thrust, and significantly more thermal management capability." CMC components can withstand more heat, weigh far less than metal ones, and are stronger and longer lasting.
Read this informative GE blog.

Image - Top Tech Tip: Tips to avoid resonance problems in stepper motors
Top Tech Tip: Tips to avoid resonance problems in stepper motors
If you need a low-cost motor with simple operation, stepper motors are a solid choice -- they can be driven, step by step, without an encoder or Hall sensor for rotor position feedback. However, according to the motor experts at Portescap, the straightforward design that makes stepper motors so popular can also lead to resonance problems in certain conditions.
Read this informative Portescap blog.

Most popular last issue

Image - How a NASA engineer created the modern airplane wing
How a NASA engineer created the modern airplane wing
Once dubbed "the man who could see air," NASA engineer Richard T. Whitcomb used a combination of visualization and intuition to revolutionize modern aviation -- by turning the shape of the airplane wing on its head. Today, nearly every commercial airplane bears the marks of Whitcomb's several innovations, which include the development of winglets on wing tips.
Read the full article.

Image - What is a C-Flex Pivot Bearing?
What is a C-Flex Pivot Bearing?
It's a flexure-based bearing utilizing internal flat crossed springs, capsuled in a cylindrical housing, to provide precise rotation with low hysteresis and no frictional losses. The C-Flex bearing will offer indefinite life when used within its rated load and rotation values. Applications include Medical, Industrial, and Aerospace.
Learn more from C-Flex, a leader in Flexing Metal Technology.
View the C-Flex Pivot Bearing training page.

Image - 1/4 ton of refrigeration: EXAIR Vortex Tube
1/4 ton of refrigeration: EXAIR Vortex Tube
This small, stainless steel Vortex Tube from EXAIR produces 1/4 ton of refrigeration and has no moving parts to wear out. Temperatures range from minus 50 to +250 degrees Fahrenheit. Cooling applications include electronic controls, machining operations, heat seals, welding operations, hot melts, and more.
More details online.

Videos+: Technologies and inspiration in action
Pilot recounts tales of SR-71 Blackbird
The SR-71 reconnaissance aircraft flew missions around the globe from 1966 to 1998 at speeds above Mach 3 and altitudes of 85,000 ft or more. Although its many contributions to national security will never be fully revealed to the public, the Skunk Works marvel holds world aviation records for its speed and altitude. In this interview with former SR-71 pilot Col. Buzz Carpenter, you'll hear a first-hand account of the aircraft's power and majesty.
View the video. An oldie but goodie.

Video Image
What's a magnetic GHOST fastener?
PEM® GHOST™ Fastening Technology from PennEngineering uses a fully concealed pinch-lock mechanism to create a secure and sleek lock with zero visible evidence of disassembly once engaged. Using a magnetic release tool on the concealed fastener actuates the internal components, unlocking the pinch-lock grip and instantly releasing the pin from the fastener. From automotive interiors to access control systems, this clever fastening tech is adaptable to many applications.
View the video.

Video Image
Hevi-Rail Linear Bearings enable telescopic racking for heavy loads
Shipping containers face a constant struggle to optimize storage space and accessibility within a confined area, as well as keep accurate inventory and streamline loading/unloading. A recent task was straightforward: Design a racking system that maximized organization and storage for cargo. In collaboration with a leading designer in storage containment, PBC Linear recommended implementing their high-load-capacity Hevi-Rail linear bearing solution, which was installed in a specially designed assembly that could handle cantilevered loads.
View the video.

Video Image

New products

Electrical/Electronics
View Products…
Mechanical
View Products…
Motion
View Products…


Subscribe to DesignFax

For advertising opportunities contact:

John Holmes

jholmes@nelsonpub.com
(847) 364-7441

Dan Beck

danbeck58@gmail.com
(518) 852-9624

Questions or comments about the eMagazine or articles? Contact us at: Designfax

www.designfax.net
PO Box 424, Alto, MI 49302

webteam@designfax.net
Privacy Statement