Click this link if you cannot read the issue below: Designfax - Tech for OEM Design Engineers
February 28, 2012Volume 08 Issue 08


Image - New ‘pin and keeper' quick-assembly <br>sign fastening system
New ‘pin and keeper' quick-assembly
sign fastening system

The Micro Plastics sign fastener is designed for rapid assembly and disassembly of a sign or other panel to its support structure. The reusable fastener was designed to fit a hole diameter of 5/16 in. to 3/8 in. (8 mm to 9.5 mm) and can be used to fasten two pieces together with total panel thickness from 1 in. to 1.64 in. (25.4 mm to 41.6 mm). Simply squeeze the keeper together and slide onto the pin, then release the keeper. Molded from impact-resistant and UV-stabilized nylon 6/6, the sign fastener is designed to withstand the elements in outdoor applications.
Click here for more information.

In this issue of Designfax

  • NASA tests rocket-powered landing demonstrator
  • Quasicrystals strengthen high-performance steel
  • Wireless sensors inside you
  • Wheels: Plastics replace metals in power lift gate
  • Mike Likes: Design Guide For Bonding Metals
  • Engineer's Toolbox: Injection molding guide to looking good
  • Videos+: Technologies and inspiration in action
    • DARPA takes LS3 (BigDog) robot for a walk
    • Security fasteners with incredible grip
  • Most Popular Last Issue
    • Wheels: Ultimate ‘go anywhere' craft
    • Video: F-35 fighter testing
  • New Products
    • Electrical, Mechanical, Motion, Special: Sensors
    Cover Image: In vivo wireless sensors [RPI]

News

Researchers develop method to examine batteries – from the inside

Timken boasts higher performance ratings for its tapered roller bearings used in vehicles and industrial applications

Automated robotic parking comes to Atlantic City, NJ

New Wifi Sensors connect directly to cloud servers and iPhone/Android platforms



Image - Get your Design Cube from Protomold
Get your Design Cube from Protomold
The Protomold Design Cube illustrates important considerations when designing plastic injection molded parts. It showcases a range of available surface finishes and examples of bosses, gussets, and ribs. It also demonstrates the impact on part quality of overly thick or thin sections, as well as ways to incorporate holes and their potential effect on resin flow.
Get your no-cost Design Cube today.

Feature articles
NASA News:
Rocket-powered landing demonstrator makes successful first flight

The first successful free flight of a new rocket-powered vertical landing demonstrator occurred recently at Mojave Air and Space Port, Mojave, CA.

The flight used a new flight control system concept that will enable future demonstrations of landing technologies needed for exploration of planets and moons, as well as near-Earth objects, like asteroids. NASA's Flight Opportunities Program sponsored the flight and control system test.
Read the full article.

Image -
Click the ad above to find out more about Setra's full line of high-performance sensing products.

Quasicrystals strengthen high-performance steel
Sandvik, a Swedish engineering group known for its work in tooling, materials technology, mining, and construction, says that the Nobel Prize in Chemistry for 2011 awarded to Prof. Daniel Shechtman last October for the discovery of quasicrystals is intrinsically linked to the groundbreaking work the company has carried out in the field of nanotechnology for more than 20 years. Sandvik is excited to see that Shechtman has finally gotten the recognition he deserves.
Read the full article.
Implantable, wireless sensors share secrets of healing tissues
A new implantable sensor developed at Rensselaer Polytechnic Institute can wirelessly transmit data from the site of a recent orthopedic surgery. Inexpensive to make and highly reliable, this new sensor holds the promise of more accurate, more cost-effective, and less invasive post-surgery monitoring and diagnosis.
Read the full article.

Is tiny manufacturing your big thing?
Check out the Micromanufacturing/MEMS/Nano Live USA 2012 show March 7-8 at the Stephens Center, Rosemont, Chicago.

Wheels: Plastics replace metals
Second-gen power lift gate uses high-precision plastic shafts and gears

An innovative transmission from Hi-Lex America continues to reliably and quietly open and close automotive lift gates thanks to design and development assistance from Ticona Engineering Polymers, which helped the automotive tier supplier create new injection-molded high-precision plastic shafts and gears.
Read the full article.

Image - Mike Likes: Loctite Design Guide For Bonding Metals
Mike Likes: Loctite Design Guide For Bonding Metals
This extensive 59-page resource details structural adhesives and provides in-depth discussions of the best adhesives for a range of metal substrates. Individual metal bonding chapters provide bond strength and shear strength data for each of eight substrates. Data is included on 23 of the newest structural adhesives from Loctite. Check out the Design Guide for Bonding Plastics too.
Get the .pdf guide (no registration).
Engineer's Toolbox:
Injection molding - The guide to looking good

First, the bad news: injection molded parts are subject to a host of cosmetic flaws including sink, gate vestiges, ejector pin blemishes, drag marks, texture flaws, knit lines, burns, flash, and inconsistent coloring. The good news is that adherence to basic design rules will eliminate many of these problems.
Read the full article

Most popular last issue
Wheels:
Ultimate ‘go anywhere' craft tested with Autodesk Simulation

ARKTOS Developments Ltd. – the designer and manufacturer of a remarkable amphibious vehicle known as the ARKTOS Craft – is using simulation software from Autodesk to prepare its products to operate in some of the world's most environmentally demanding locations.
Read the full article.

Image - Video: F-35 fighter testing: 2011 is 'year of firsts'
Video: F-35 fighter testing: 2011 is 'year of firsts'
The F-35A flight test team at Edwards AFB, CA, recounts 2011, a productive year of test that they call "the year of the firsts." From flight envelope expansion to mission systems, and KC-10 fuel testing to sensor fusion, the team made great strides testing the F-35A fighter, a conventional takeoff and landing craft that is the smallest, lightest F-35 version and the only one in the series equipped with an internal cannon. The fighter's fraternal twin, the F-35B, is a short-takeoff and vertical-landing craft.
View the video.

Videos+: Technologies and inspiration in action
DARPA takes LS3 (BigDog) robot for a walk
DARPA is developing a semi-autonomous four-legged robot, the Legged Squad Support System (LS3) based on the BigDog system created by Boston Dynamics, to work in tandem with a squad of Marines or Soldiers. Recently, the LS3 prototype underwent its first outdoor exercise, demonstrating the ability to follow a person using its "eyes" – sensors that allow the robot to distinguish between trees, rocks, terrain obstacles, and people. Over the course of the next 18 months, DARPA plans to complete development of and refine key capabilities to ensure LS3 is able to support dismounted squads of warfighters. Features to be tested and validated include the ability to carry 400 lb on a 20-mile trek in 24 hr without being refueled. Also planned is the addition of "hearing" technology, enabling squad members to speak commands to LS3 such as "stop," "sit," or "come here." Hopefully it will be made quieter too.
View the video.

Video Image
Security fasteners with incredible grip
Raptor claw-tooth fasteners are the most secure fasteners on the planet, providing "lock" security – not just vandal resistance. Lock security is proven by Bryce Fastener's KeyRex feedback, which shows no reported security breaches in the last 2 million fasteners. Raptor engineering yields 30% higher clamp loads because the radial claws allow the center head to flex downward with torque. The Raptor claws were engineered specifically to be placed only on the outside edge with a radius that would bite. These fasteners feature ever-changing proprietary keyways that foreign security-bit manufacturers can't duplicate.
View the video.

Video Image

New products

Electrical/Electronics
View Products…
Mechanical
View Products…
Motion
View Products…
Sensors
View Products…


Subscribe to DesignFax

For advertising opportunities contact:

John Holmes

jholmes@nelsonpub.com
(847) 364-7441

Dan Beck

danbeck58@gmail.com
(518) 852-9624

Questions or comments about the eMagazine or articles? Contact us at: Designfax

www.designfax.net
PO Box 424, Alto, MI 49302

webteam@designfax.net
Privacy Statement